Dangerous Ladies' 3D models for Lux's Radiant Staff
Model by Jennifer Rezny (@quicksparrows)

.stl format. Sliced for a 300mm printer but includes some files for taller printers, as well as many smaller parts. Finishes around 60".

The gem is made to float by mounting it on an acrylic rod. If you can't find clear acrylic rods, you can always use a regular dowel and paint it.

Both halves come apart on a screw system; there is a slot inside the middle joint for a 1/2” nut (measured from flat side to flat side) that is 1/4” deep. Glue a nut in there and put a corresponding double-ended bolt to screw them together.

Assembles on the following:
15" of 1/2" dowel for handle, x2
7.25" of 1/4" clear acrylic for gem mount, x2


Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file