Dangerous Ladies' 3D models for Kairi's Destiny's Embrace keyblade.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Cut for a 200x200x300mm and 250mm tall printer, but many pieces will fit on smaller beds.

This is a big file with a lot of parts! It prints in 40+ pieces (including keys) plus has 18 flowers. 

Uses a 30" long dowel, 7/8" diameter, but you can also use a 1/2" PVC pipe (with an outer diameter of 21.33mm) with a bit of extra wiggle room. The dowel/pipe is exposed and serves as the handle, so a pipe can save you a bit of sanding time.

If possible, we do suggest resin printing the flowers to save yourself some sanding time, but we have printed them FDM before and they come out okay with really short layers –– think 0.1, or 0.06 if possible. The undersides will need support.

There's also some alternate versions included, including:
- a "separated left handle" that allows one to print the left handle in one whole piece, for a seamless print; this is ideal for resin
- a set of files for moulding the left handle to cast it in clear resin

Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies