Subscribe to our newsletter for 10% OFF!

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for Ganyu's accessories.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Should fit on most printers, but the horns and back dangle need a roughly 200x200mm footprint; you can get by with a little narrower or

There's two versions of the bell, one with the dangle permanently mounted and another with the dangle separate. You can attach this dangle by putting two screw eyes in the bell and dangle so the dangle can swing!

There are some pieces on this (like the collar pieces) that are meant to be flexible. If you print them very thin with a solid infill you can heat form them to curve, but it will be easier if you reduce the height by 50% so it's even thinner.

The horns have slots for both Chicago screws and magnets on the underside, so you can either put a 10mm wide Chicago screw in or you can use three 1/2" magnets (per horn.)

Looking for where the second underbust diamond goes? It goes on the back under the lower back piece; it's hidden by the large back piece.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Sale

Ganyu's Accessories [3D Print Files]

SKU: 82
Regular price $15.00 $12.75 15% off
Unit price
per 
Instant Download
Email Delivery

.stl file

Shipped and Made Consciously. Read More

Need help? Contact us

Dangerous Ladies' 3D models for Ganyu's accessories.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Should fit on most printers, but the horns and back dangle need a roughly 200x200mm footprint; you can get by with a little narrower or

There's two versions of the bell, one with the dangle permanently mounted and another with the dangle separate. You can attach this dangle by putting two screw eyes in the bell and dangle so the dangle can swing!

There are some pieces on this (like the collar pieces) that are meant to be flexible. If you print them very thin with a solid infill you can heat form them to curve, but it will be easier if you reduce the height by 50% so it's even thinner.

The horns have slots for both Chicago screws and magnets on the underside, so you can either put a 10mm wide Chicago screw in or you can use three 1/2" magnets (per horn.)

Looking for where the second underbust diamond goes? It goes on the back under the lower back piece; it's hidden by the large back piece.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more