![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Edenmorn Cavalry Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/edenmorn-cavalry-bow-3d-print-files-496087.png?v=1707155105)
![Edenmorn Cavalry Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/edenmorn-cavalry-bow-3d-print-files-932269.png?v=1707155106)
![Edenmorn Cavalry Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/edenmorn-cavalry-bow-3d-print-files-215248.png?v=1707155106)
![Edenmorn Cavalry Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/edenmorn-cavalry-bow-3d-print-files-192176.png?v=1707155106)
Dangerous Ladies' 3D models for the Edenmorn Cavalry Bow!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm tall bed, but many pieces will fit smaller. Finishes 60" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The arrow fits on a 1/4" dowel, cut to the length of your choice.
The bow assembles on some printed keys for alignment and some dowels for strength. These are:
TOP: 3/8" rod cut 11.5" long
MIDDLE/HANDLE: 3/8" rod cut 18.25" long
BOTTOM: 3/8" rod cut 11.75" long.
I strongly suggest using steel or aluminum for strength but wooden dowel will work just fine too.
I suggest attaching the floating bit using wire or clear fishing line!
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm tall bed, but many pieces will fit smaller. Finishes 60" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The arrow fits on a 1/4" dowel, cut to the length of your choice.
The bow assembles on some printed keys for alignment and some dowels for strength. These are:
TOP: 3/8" rod cut 11.5" long
MIDDLE/HANDLE: 3/8" rod cut 18.25" long
BOTTOM: 3/8" rod cut 11.75" long.
I strongly suggest using steel or aluminum for strength but wooden dowel will work just fine too.
I suggest attaching the floating bit using wire or clear fishing line!
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Edenmorn Cavalry Bow [3D Print Files]
SKU: 1634
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for the Edenmorn Cavalry Bow!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm tall bed, but many pieces will fit smaller. Finishes 60" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The arrow fits on a 1/4" dowel, cut to the length of your choice.
The bow assembles on some printed keys for alignment and some dowels for strength. These are:
TOP: 3/8" rod cut 11.5" long
MIDDLE/HANDLE: 3/8" rod cut 18.25" long
BOTTOM: 3/8" rod cut 11.75" long.
I strongly suggest using steel or aluminum for strength but wooden dowel will work just fine too.
I suggest attaching the floating bit using wire or clear fishing line!
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm tall bed, but many pieces will fit smaller. Finishes 60" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The arrow fits on a 1/4" dowel, cut to the length of your choice.
The bow assembles on some printed keys for alignment and some dowels for strength. These are:
TOP: 3/8" rod cut 11.5" long
MIDDLE/HANDLE: 3/8" rod cut 18.25" long
BOTTOM: 3/8" rod cut 11.75" long.
I strongly suggest using steel or aluminum for strength but wooden dowel will work just fine too.
I suggest attaching the floating bit using wire or clear fishing line!
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...