Dangerous Ladies' 3D models for Dual Haken
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes at 65" end to end. Cut for a 220mm print bed.
Assembles on a 1" dowel, cut 44.5" long
Assembly Tips:
-Handle Assembly - Start here as the main handle dowel will be used to assemble the lower hoop pieces
-Lower Hoop Assembly - This section has 3 pieces that assemble onto the main handle dowel, insert the 2 large round keys on top
- Upper Hoop Assembly - This section uses 4 small keys and is to be placed on top of the lower hoop assembly, onto the large keys.
- Lower Blade Assembly - This section uses 1 large key, and 4 small ones, assemble this piece fully with all keys and place on the hoop assembly
- Upper Blade Assembly - These 5 pieces may need to be assembled in an upper and lower half then assembled onto the main hoop.
Printing tips:
- use supports and brims to ensure dowel and alignment holes are correctly sized
Files include:
- Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Dangerous Ladies' 3D models for Dual Haken
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes at 65" end to end. Cut for a 220mm print bed.
Assembles on a 1" dowel, cut 44.5" long
Assembly Tips:
-Handle Assembly - Start here as the main handle dowel will be used to assemble the lower hoop pieces
-Lower Hoop Assembly - This section has 3 pieces that assemble onto the main handle dowel, insert the 2 large round keys on top
- Upper Hoop Assembly - This section uses 4 small keys and is to be placed on top of the lower hoop assembly, onto the large keys.
- Lower Blade Assembly - This section uses 1 large key, and 4 small ones, assemble this piece fully with all keys and place on the hoop assembly
- Upper Blade Assembly - These 5 pieces may need to be assembled in an upper and lower half then assembled onto the main hoop.
Printing tips:
- use supports and brims to ensure dowel and alignment holes are correctly sized
Files include:
- Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...