Dangerous Ladies' 3D models for Azeyma's fans
Modeled by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Fan blade finish at about 15".
This model contains 5 printable components:
-2 inner fan halves
-3 outer fan pieces
Pieces are numbered for ONE fan. Please double to print two.
Assembles on the following hardware:
- Short chunks of 1.75mm filament is used to join parts together for alignment, but you can use toothpick chunks as well.
Assembly tips:
- The outer fan blades are 3 pieces and should fit snugly before being glued together. Because the holes are small, a small drill bit may be necessary to clear support out of the alignment holes. The outer fan blades have 5 slots.
- The inner fan blades are similar, but with 3 slots.
Assembles on a bolt or dowel for the middle pivot.
Files include:
-Renders
-.STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Dangerous Ladies' 3D models for Azeyma's fans
Modeled by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Fan blade finish at about 15".
This model contains 5 printable components:
-2 inner fan halves
-3 outer fan pieces
Pieces are numbered for ONE fan. Please double to print two.
Assembles on the following hardware:
- Short chunks of 1.75mm filament is used to join parts together for alignment, but you can use toothpick chunks as well.
Assembly tips:
- The outer fan blades are 3 pieces and should fit snugly before being glued together. Because the holes are small, a small drill bit may be necessary to clear support out of the alignment holes. The outer fan blades have 5 slots.
- The inner fan blades are similar, but with 3 slots.
Assembles on a bolt or dowel for the middle pivot.
Files include:
-Renders
-.STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
Basic Supplies for Bodyshopping
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
