Description
A 3D printed cosplay kit for the Aqua Simulacra bow from Genshin Impact. Finishes at 55" at full scale.
Assembles entirely on printed pegs; it's too curved to fit internal dowels. However, there are a number of little slots for 1/4" clear acrylic rods so you can make the "floating" pieces "float" almost invisibly. They are as follows:
Pipe A: 182mm
Pipe B: 193mm
Hovering Butterfly: 40mm
Hovering Emblem: 40mm
String Bottom: 70mm
String Top: 45mm
(Or) Whole String: 1025mm
If you don't want to do these, you can just use wooden dowel or run string from hole to hole.
Ships unfinished and may require sanding, filling, and painting. Colours of 3D Printed pieces will vary.
Glue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order!
Feel free to tag us to show us what you print and make! We love to see finished works.
Description
A 3D printed cosplay kit for the Aqua Simulacra bow from Genshin Impact. Finishes at 55" at full scale.
Assembles entirely on printed pegs; it's too curved to fit internal dowels. However, there are a number of little slots for 1/4" clear acrylic rods so you can make the "floating" pieces "float" almost invisibly. They are as follows:
Pipe A: 182mm
Pipe B: 193mm
Hovering Butterfly: 40mm
Hovering Emblem: 40mm
String Bottom: 70mm
String Top: 45mm
(Or) Whole String: 1025mm
If you don't want to do these, you can just use wooden dowel or run string from hole to hole.
Ships unfinished and may require sanding, filling, and painting. Colours of 3D Printed pieces will vary.
Glue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order!
Feel free to tag us to show us what you print and make! We love to see finished works.
Reviews
Finishing Guides

The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.