![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Riku's Braveheart Keyblade [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/rikus-braveheart-keyblade-3d-print-files-715835.png?v=1709647261)
![Riku's Braveheart Keyblade [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/rikus-braveheart-keyblade-3d-print-files-421963.png?v=1709647261)
![Riku's Braveheart Keyblade [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/rikus-braveheart-keyblade-3d-print-files-154455.png?v=1709647261)
Dangerous Ladies' 3D models for Riku's "Braveheart" keyblade.
Model by Jennifer Rezny (@quicksparrows)
Finishes at 48" long, .stl format.
Pre-sliced and keyed for printing on a 20cmx20cmx20cm bed, but we have also included a complete, unkeyed model for people who would prefer to slice their own.
Model is set up to require at least 3 half-inch dowels for support rods for the blade and the connection between the blade and handle; the dowels run the entire length of the blade so it should be very durable. Handle and blade are pegged separately so you could (in theory) put strong rare earth magnets on the end of the support dowels and at the bottom of the support channels to make it collapsible for travel; this method should ideally drop the keyblade to a length that it can fit in large suitcases in two pieces, but props are always more durable in one piece.
We have included a printed eye for the keychain but recommend replacing it with a real one to save yourself some time/effort. Chain model is not included but keychain end is.
Files include:
- Reference images
- Braveheart .stl files (sliced)
- Braveheart .stl files (whole)
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm; it will get quite heavy if you go higher, but we have found 0.8mm walls are quite weak for something so big.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
Finishes at 48" long, .stl format.
Pre-sliced and keyed for printing on a 20cmx20cmx20cm bed, but we have also included a complete, unkeyed model for people who would prefer to slice their own.
Model is set up to require at least 3 half-inch dowels for support rods for the blade and the connection between the blade and handle; the dowels run the entire length of the blade so it should be very durable. Handle and blade are pegged separately so you could (in theory) put strong rare earth magnets on the end of the support dowels and at the bottom of the support channels to make it collapsible for travel; this method should ideally drop the keyblade to a length that it can fit in large suitcases in two pieces, but props are always more durable in one piece.
We have included a printed eye for the keychain but recommend replacing it with a real one to save yourself some time/effort. Chain model is not included but keychain end is.
Files include:
- Reference images
- Braveheart .stl files (sliced)
- Braveheart .stl files (whole)
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm; it will get quite heavy if you go higher, but we have found 0.8mm walls are quite weak for something so big.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Riku's Braveheart Keyblade [3D Print Files]
SKU: 1803
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Riku's "Braveheart" keyblade.
Model by Jennifer Rezny (@quicksparrows)
Finishes at 48" long, .stl format.
Pre-sliced and keyed for printing on a 20cmx20cmx20cm bed, but we have also included a complete, unkeyed model for people who would prefer to slice their own.
Model is set up to require at least 3 half-inch dowels for support rods for the blade and the connection between the blade and handle; the dowels run the entire length of the blade so it should be very durable. Handle and blade are pegged separately so you could (in theory) put strong rare earth magnets on the end of the support dowels and at the bottom of the support channels to make it collapsible for travel; this method should ideally drop the keyblade to a length that it can fit in large suitcases in two pieces, but props are always more durable in one piece.
We have included a printed eye for the keychain but recommend replacing it with a real one to save yourself some time/effort. Chain model is not included but keychain end is.
Files include:
- Reference images
- Braveheart .stl files (sliced)
- Braveheart .stl files (whole)
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm; it will get quite heavy if you go higher, but we have found 0.8mm walls are quite weak for something so big.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
Finishes at 48" long, .stl format.
Pre-sliced and keyed for printing on a 20cmx20cmx20cm bed, but we have also included a complete, unkeyed model for people who would prefer to slice their own.
Model is set up to require at least 3 half-inch dowels for support rods for the blade and the connection between the blade and handle; the dowels run the entire length of the blade so it should be very durable. Handle and blade are pegged separately so you could (in theory) put strong rare earth magnets on the end of the support dowels and at the bottom of the support channels to make it collapsible for travel; this method should ideally drop the keyblade to a length that it can fit in large suitcases in two pieces, but props are always more durable in one piece.
We have included a printed eye for the keychain but recommend replacing it with a real one to save yourself some time/effort. Chain model is not included but keychain end is.
Files include:
- Reference images
- Braveheart .stl files (sliced)
- Braveheart .stl files (whole)
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm; it will get quite heavy if you go higher, but we have found 0.8mm walls are quite weak for something so big.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...