![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Hypnos' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/hypnos-accessories-3d-print-files-852718.jpg?v=1707155308)
![Hypnos' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/hypnos-accessories-3d-print-files-753209.jpg?v=1707155308)
![Hypnos' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/hypnos-accessories-3d-print-files-737977.jpg?v=1707155308)
![Hypnos' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/hypnos-accessories-3d-print-files-998313.jpg?v=1707155308)
Dangerous Ladies' 3D models for Hypnos' accessories.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on just about any printer. Collar is about 16" by default, the wings span 39", and the bib serves as a harness to hold the wings up.
The harness is worn under the coat, with slots put in the coat for the clear acrylic rods to pass through, and then the wings get mounted onto that. This helps it look like the wings "float", and makes it easy to take them on and off for travel, eating, and other things you might want to do when wearing a costume without taking the whole thing off.
Assembles with the following rods:
- 2x 2.5" acrylic rod, 3/8" diameter
- 2x 4.5" acrylic rod, 3/8" diameter
You can adjust these lengths if you want the wings to sit higher or lower.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Models by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on just about any printer. Collar is about 16" by default, the wings span 39", and the bib serves as a harness to hold the wings up.
The harness is worn under the coat, with slots put in the coat for the clear acrylic rods to pass through, and then the wings get mounted onto that. This helps it look like the wings "float", and makes it easy to take them on and off for travel, eating, and other things you might want to do when wearing a costume without taking the whole thing off.
Assembles with the following rods:
- 2x 2.5" acrylic rod, 3/8" diameter
- 2x 4.5" acrylic rod, 3/8" diameter
You can adjust these lengths if you want the wings to sit higher or lower.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Hypnos' Accessories [3D Print Files]
SKU: 431
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Hypnos' accessories.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on just about any printer. Collar is about 16" by default, the wings span 39", and the bib serves as a harness to hold the wings up.
The harness is worn under the coat, with slots put in the coat for the clear acrylic rods to pass through, and then the wings get mounted onto that. This helps it look like the wings "float", and makes it easy to take them on and off for travel, eating, and other things you might want to do when wearing a costume without taking the whole thing off.
Assembles with the following rods:
- 2x 2.5" acrylic rod, 3/8" diameter
- 2x 4.5" acrylic rod, 3/8" diameter
You can adjust these lengths if you want the wings to sit higher or lower.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Models by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on just about any printer. Collar is about 16" by default, the wings span 39", and the bib serves as a harness to hold the wings up.
The harness is worn under the coat, with slots put in the coat for the clear acrylic rods to pass through, and then the wings get mounted onto that. This helps it look like the wings "float", and makes it easy to take them on and off for travel, eating, and other things you might want to do when wearing a costume without taking the whole thing off.
Assembles with the following rods:
- 2x 2.5" acrylic rod, 3/8" diameter
- 2x 4.5" acrylic rod, 3/8" diameter
You can adjust these lengths if you want the wings to sit higher or lower.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...