![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Four Pointed Star Guardian Stars [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/four-pointed-star-guardian-stars-3d-print-files-962570.jpg?v=1707155787)
![Four Pointed Star Guardian Stars [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/four-pointed-star-guardian-stars-3d-print-files-849434.jpg?v=1707155787)
![Four Pointed Star Guardian Stars [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/four-pointed-star-guardian-stars-3d-print-files-877651.jpg?v=1707155787)
Dangerous Ladies' 3D models for Four-Pointed Stars with Backings
Model by Jennifer Rezny (@quicksparrows)
.stl format. Includes a star and a backing in sizes 1", 1.5", 2", 2.5", 3", 3.5" and 4". The sizing is measured by the inner star, as they can be used without the backing; the backings make them slightly larger!
These are great for magical girl and Star Guardian characters.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Four Pointed Star Guardian Stars [3D Print Files]
Dangerous Ladies' 3D models for Four-Pointed Stars with Backings
Model by Jennifer Rezny (@quicksparrows)
.stl format. Includes a star and a backing in sizes 1", 1.5", 2", 2.5", 3", 3.5" and 4". The sizing is measured by the inner star, as they can be used without the backing; the backings make them slightly larger!
These are great for magical girl and Star Guardian characters.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...