Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm or 250mm tall printer. The arms can come off for easy travel and storage.
The bow uses a number of dowel segments to assemble:
BOTH VERSIONS
1x 17.25" piece of 3/8" doweling for handle
2x 1.75" pieces of 3/16" doweling for the arm tips.
300MM:
2x 5.5" pieces of 3/8" doweling for mid-arm
250mm"
2x 4.5" pieces of 3/8 dowelling for lower-to-mid arm
2x 2.75" pieces of 3/8" dowelling for mid-to-upper arm
We suggest printing the arm tips with double-thick walls (even up to 2mm); the tips are often under some sort of pressure from the bowstring, so having a thicker tip will make it more durable. The tip has a loop cut out of it for the string to tie into.
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 300mm or 250mm tall printer. The arms can come off for easy travel and storage.
The bow uses a number of dowel segments to assemble:
BOTH VERSIONS
1x 17.25" piece of 3/8" doweling for handle
2x 1.75" pieces of 3/16" doweling for the arm tips.
300MM:
2x 5.5" pieces of 3/8" doweling for mid-arm
250mm"
2x 4.5" pieces of 3/8 dowelling for lower-to-mid arm
2x 2.75" pieces of 3/8" dowelling for mid-to-upper arm
We suggest printing the arm tips with double-thick walls (even up to 2mm); the tips are often under some sort of pressure from the bowstring, so having a thicker tip will make it more durable. The tip has a loop cut out of it for the string to tie into.
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Reviews
Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...