![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Lady Seiros' Shield [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/lady-seiros-shield-3d-print-files-822912.jpg?v=1707155672)
![Lady Seiros' Shield [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/lady-seiros-shield-3d-print-files-659955.jpg?v=1707155672)
Dangerous Ladies' 3D model for Lady Seiros' Shield/Buckler
Model by Christine Van Schaik (@horrificseance)
.stl format. Pre-sliced for printing on a 200mm bed. We have prioritized putting the seams in easy places rather than reducing piece count, but we've included a whole version in case you'd like to slice it yourself.
We have included an .stl file for an assembly peg, but we suggest using 16 dowel pins (1/4" wide, 1" long) instead; they're stronger and save print hours. We've also put slots in the back for your strap to install into; the hole is 10mm across and fits most chicago screw bases. You can then make your leather strap (and matching strap brackets) removable by screwing them on and off.
The shield finishes around 18".
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Christine Van Schaik (@horrificseance)
.stl format. Pre-sliced for printing on a 200mm bed. We have prioritized putting the seams in easy places rather than reducing piece count, but we've included a whole version in case you'd like to slice it yourself.
We have included an .stl file for an assembly peg, but we suggest using 16 dowel pins (1/4" wide, 1" long) instead; they're stronger and save print hours. We've also put slots in the back for your strap to install into; the hole is 10mm across and fits most chicago screw bases. You can then make your leather strap (and matching strap brackets) removable by screwing them on and off.
The shield finishes around 18".
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Lady Seiros' Shield [3D Print Files]
SKU: 545
Instant Download
Email Delivery
Dangerous Ladies' 3D model for Lady Seiros' Shield/Buckler
Model by Christine Van Schaik (@horrificseance)
.stl format. Pre-sliced for printing on a 200mm bed. We have prioritized putting the seams in easy places rather than reducing piece count, but we've included a whole version in case you'd like to slice it yourself.
We have included an .stl file for an assembly peg, but we suggest using 16 dowel pins (1/4" wide, 1" long) instead; they're stronger and save print hours. We've also put slots in the back for your strap to install into; the hole is 10mm across and fits most chicago screw bases. You can then make your leather strap (and matching strap brackets) removable by screwing them on and off.
The shield finishes around 18".
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Christine Van Schaik (@horrificseance)
.stl format. Pre-sliced for printing on a 200mm bed. We have prioritized putting the seams in easy places rather than reducing piece count, but we've included a whole version in case you'd like to slice it yourself.
We have included an .stl file for an assembly peg, but we suggest using 16 dowel pins (1/4" wide, 1" long) instead; they're stronger and save print hours. We've also put slots in the back for your strap to install into; the hole is 10mm across and fits most chicago screw bases. You can then make your leather strap (and matching strap brackets) removable by screwing them on and off.
The shield finishes around 18".
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...