![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Chrom's Shoulder Pauldron [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chroms-shoulder-pauldron-3d-print-files-114527.jpg?v=1707154898)
![Chrom's Shoulder Pauldron [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chroms-shoulder-pauldron-3d-print-files-441160.jpg?v=1707154898)
![Chrom's Shoulder Pauldron [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chroms-shoulder-pauldron-3d-print-files-467368.jpg?v=1707154898)
![Chrom's Shoulder Pauldron [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chroms-shoulder-pauldron-3d-print-files-239015.jpg?v=1707154898)
Dangerous Ladies' 3D models for Chrom's shoulder armor.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Shoulder Pauldron is quite dramatically sized; it's about 10" deep. Try a test print first before you print your good one! Set up for printing on a 200x200x200, 250x250x250 or 300x300x400 printer, depending on how many seams you like.
Files include:
- Photos
- .STL files
We printed ours at 0.1mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Chrom's Shoulder Pauldron [3D Print Files]
Dangerous Ladies' 3D models for Chrom's shoulder armor.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Shoulder Pauldron is quite dramatically sized; it's about 10" deep. Try a test print first before you print your good one! Set up for printing on a 200x200x200, 250x250x250 or 300x300x400 printer, depending on how many seams you like.
Files include:
- Photos
- .STL files
We printed ours at 0.1mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...