![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-569924.png?v=1726007012)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-759653.png?v=1726007012)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-514687.png?v=1726007012)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-731041.png?v=1726007012)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-766584.png?v=1726007012)
![Pictomancer's Chocobo Brush [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pictomancers-chocobo-brush-3d-print-files-cosplay-292335.png?v=1726007012)
Dangerous Ladies' 3D models for the Chocobo Brush and Palette.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at about 32" for the brush.
The palette includes a separate smaller so you can make multiple colours if you want. The brush's tip is hollow so it's very light, and has extra tolerance so you can cover it in wig fibre or similar to make a proper brush.
The brush assembles on a 21" rod, 1/4" diameter. You can use wood or aluminum or even steel.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Pictomancer's Chocobo Brush [3D Print Files]
Dangerous Ladies' 3D models for the Chocobo Brush and Palette.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at about 32" for the brush.
The palette includes a separate smaller so you can make multiple colours if you want. The brush's tip is hollow so it's very light, and has extra tolerance so you can cover it in wig fibre or similar to make a proper brush.
The brush assembles on a 21" rod, 1/4" diameter. You can use wood or aluminum or even steel.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...