![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![She-Ra's S5 Gauntlets [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/she-ras-s5-gauntlets-3d-print-files-301313.jpg?v=1707156166)
![She-Ra's S5 Gauntlets [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/she-ras-s5-gauntlets-3d-print-files-344619.jpg?v=1707156166)
![She-Ra's S5 Gauntlets [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/she-ras-s5-gauntlets-3d-print-files-111889.jpg?v=1707156166)
![She-Ra's S5 Gauntlets [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/she-ras-s5-gauntlets-3d-print-files-990579.jpg?v=1707156166)
Dangerous Ladies' 3D models for She-Ra's S5 gauntlets.
Model by Jennifer Rezny (@quicksparrows)
.stl format. They print in halves with a slot key so they align back together again. While the fit is pretty snug, we do suggest maybe putting a band of elastic on the inside to pull it together -- that way you can pull it apart to get your hand through and then let the elastic pull it back together after :)
The default size is a 6" wrist, 9.25" arm (below elbow), and 7.5" from top to bottom. Try a test print first to see what kind of scaling you need to do!
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. They print in halves with a slot key so they align back together again. While the fit is pretty snug, we do suggest maybe putting a band of elastic on the inside to pull it together -- that way you can pull it apart to get your hand through and then let the elastic pull it back together after :)
The default size is a 6" wrist, 9.25" arm (below elbow), and 7.5" from top to bottom. Try a test print first to see what kind of scaling you need to do!
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Sale
She-Ra's S5 Gauntlets [3D Print Files]
SKU: 442
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for She-Ra's S5 gauntlets.
Model by Jennifer Rezny (@quicksparrows)
.stl format. They print in halves with a slot key so they align back together again. While the fit is pretty snug, we do suggest maybe putting a band of elastic on the inside to pull it together -- that way you can pull it apart to get your hand through and then let the elastic pull it back together after :)
The default size is a 6" wrist, 9.25" arm (below elbow), and 7.5" from top to bottom. Try a test print first to see what kind of scaling you need to do!
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. They print in halves with a slot key so they align back together again. While the fit is pretty snug, we do suggest maybe putting a band of elastic on the inside to pull it together -- that way you can pull it apart to get your hand through and then let the elastic pull it back together after :)
The default size is a 6" wrist, 9.25" arm (below elbow), and 7.5" from top to bottom. Try a test print first to see what kind of scaling you need to do!
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...