Dangerous Ladies' 3D models for Sailor Moon's Sailor Cosmos staff.
Model by Christine van Schaik (@horrificseance)

.stl format. Sliced for printing on a 200x200x200mm printer, but many pieces fit smaller. Finishes at 80", but you can easily adjust the size by just cutting the handle shorter.

I've included a few alternate cuts of the wings. The orb is hollow so you can print it in clear filament if you'd like.

Designed to slot onto a 71" long PVC pipe, 1/2" ID, but you can obviously cut it much shorter if you don't want it to be that long. If you print everything at 118% scale, you can use a 1" wooden dowel instead, but then you should cut the handle shorter.


Files include:
- Photos
- .STL files

We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies