![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![PVC Pipe Connectors for Collapsible Props with Magnets [3D Print Files] cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pvc-pipe-connectors-for-collapsible-props-with-magnets-3d-print-files-cosplay-358424.png?v=1726719410)
![PVC Pipe Connectors for Collapsible Props with Magnets [3D Print Files] cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pvc-pipe-connectors-for-collapsible-props-with-magnets-3d-print-files-cosplay-134566.png?v=1726719410)
![PVC Pipe Connectors for Collapsible Props with Magnets [3D Print Files] cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/pvc-pipe-connectors-for-collapsible-props-with-magnets-3d-print-files-cosplay-291421.png?v=1726719410)
Dangerous Ladies' 3D models for basic PVC pipe connectors.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer. Print with REALLY thick walls if you want them to be super durable!
A great way to make props collapsible is to split the PVC pipe and install a joint, but commercial joints tend to be either difficult to find or bulky, as they fit to the outside of the tube.
PVC pipe, as you may have noticed, also comes in different sizes. It's measured by inner diameter, but that varies slightly depending on whether the pipe is schedule 40 or schedule 80. Annoying, right?! It can make it really hard to find something that slots into each end snugly without being too loose or too tight.
This file solves that, and adds an extra bit of security for separation: there's magnet slots. These printable tubes and sheaths slot into each end of the PVC pipe, so you can glue it in one side and then slot that into the other part to take it apart or put it together.
You can figure out which size you need to print by looking at your PVC pipe; it should be printed right on it whether it's schedule 40 or 80.
To install, the sheath should be flush with the edge of the pipe, and the connecting tube should sink in until the split between the thicker part and thinner part.
You might also find they are a smidge tight or a smidge loose; sometimes this is because pipes can vary very slightly from company to company, and sometimes because your printer isn't calibrated well or is printing too fast to do accurate dimensions. That's okay! You can just scale the print up or down very slightly as needed.
They use the following magnets:
1/2" connector = 3/8" magnet
3/4" connector = 1/2" magnet
1" connector = 0.75" magnet
1-1/4" connector = 1" magnet
1-1/2" connector = 1" magnet
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
PVC Pipe Connectors for Collapsible Props with Magnets [3D Print Files]
Dangerous Ladies' 3D models for basic PVC pipe connectors.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer. Print with REALLY thick walls if you want them to be super durable!
A great way to make props collapsible is to split the PVC pipe and install a joint, but commercial joints tend to be either difficult to find or bulky, as they fit to the outside of the tube.
PVC pipe, as you may have noticed, also comes in different sizes. It's measured by inner diameter, but that varies slightly depending on whether the pipe is schedule 40 or schedule 80. Annoying, right?! It can make it really hard to find something that slots into each end snugly without being too loose or too tight.
This file solves that, and adds an extra bit of security for separation: there's magnet slots. These printable tubes and sheaths slot into each end of the PVC pipe, so you can glue it in one side and then slot that into the other part to take it apart or put it together.
You can figure out which size you need to print by looking at your PVC pipe; it should be printed right on it whether it's schedule 40 or 80.
To install, the sheath should be flush with the edge of the pipe, and the connecting tube should sink in until the split between the thicker part and thinner part.
You might also find they are a smidge tight or a smidge loose; sometimes this is because pipes can vary very slightly from company to company, and sometimes because your printer isn't calibrated well or is printing too fast to do accurate dimensions. That's okay! You can just scale the print up or down very slightly as needed.
They use the following magnets:
1/2" connector = 3/8" magnet
3/4" connector = 1/2" magnet
1" connector = 0.75" magnet
1-1/4" connector = 1" magnet
1-1/2" connector = 1" magnet
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...