![Yuffie's Shuriken Remake Version [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yuffies-shuriken-remake-version-3d-print-files-614717.png?v=1709308886)
![Yuffie's Shuriken Remake Version [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yuffies-shuriken-remake-version-3d-print-files-760159.png?v=1709308886)
Dangerous Ladies' 3D models for Yuffie's Shuriken
Model by Jennifer Rezny (@quicksparrows)
.stl format. Split for 200mm printers, but includes a whole version of the arms. It is approximately 40" across finished.
For strength, the model has slots for four 1/4" round dowels, each 14" long. If you want, you can use these to keep the spikes removable for travel and storage. Just slot the spike on and off the dowel!
The material gems are 5/8" domes, if you want to use a mould of your own. We also offer them as an option in our 3D printed kit listing to purchase the required gems in your requested colours!
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Split for 200mm printers, but includes a whole version of the arms. It is approximately 40" across finished.
For strength, the model has slots for four 1/4" round dowels, each 14" long. If you want, you can use these to keep the spikes removable for travel and storage. Just slot the spike on and off the dowel!
The material gems are 5/8" domes, if you want to use a mould of your own. We also offer them as an option in our 3D printed kit listing to purchase the required gems in your requested colours!
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Yuffie's Shuriken Remake Version [3D Print Files]
SKU: 1747
Sale
Made to Order
Ships Worldwide
Payment Plans Available on Orders over $100!
Contact us to learn more.
Dangerous Ladies' 3D models for Yuffie's Shuriken
Model by Jennifer Rezny (@quicksparrows)
.stl format. Split for 200mm printers, but includes a whole version of the arms. It is approximately 40" across finished.
For strength, the model has slots for four 1/4" round dowels, each 14" long. If you want, you can use these to keep the spikes removable for travel and storage. Just slot the spike on and off the dowel!
The material gems are 5/8" domes, if you want to use a mould of your own. We also offer them as an option in our 3D printed kit listing to purchase the required gems in your requested colours!
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Split for 200mm printers, but includes a whole version of the arms. It is approximately 40" across finished.
For strength, the model has slots for four 1/4" round dowels, each 14" long. If you want, you can use these to keep the spikes removable for travel and storage. Just slot the spike on and off the dowel!
The material gems are 5/8" domes, if you want to use a mould of your own. We also offer them as an option in our 3D printed kit listing to purchase the required gems in your requested colours!
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.