![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Yuffie's Remake Armor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yuffies-remake-armor-3d-print-files-583944.jpg?v=1707156612)
![Yuffie's Remake Armor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yuffies-remake-armor-3d-print-files-666468.jpg?v=1707156612)
Dangerous Ladies' 3D models for Yuffie's Remake Armor
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 250mm printer (UPDATE OCT 2021 -- I've now included cut versions in halves and quarters for easier printing, fewer overhangs, smaller printers, etc.)
Includes a shoulder pauldron, finger plug, and forehead plate.
The shoulder pauldron has on the inside for the installation of a chicago screw for rigging.
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 250mm printer (UPDATE OCT 2021 -- I've now included cut versions in halves and quarters for easier printing, fewer overhangs, smaller printers, etc.)
Includes a shoulder pauldron, finger plug, and forehead plate.
The shoulder pauldron has on the inside for the installation of a chicago screw for rigging.
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Sale
Yuffie's Remake Armor [3D Print Files]
SKU: 905
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Yuffie's Remake Armor
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 250mm printer (UPDATE OCT 2021 -- I've now included cut versions in halves and quarters for easier printing, fewer overhangs, smaller printers, etc.)
Includes a shoulder pauldron, finger plug, and forehead plate.
The shoulder pauldron has on the inside for the installation of a chicago screw for rigging.
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 250mm printer (UPDATE OCT 2021 -- I've now included cut versions in halves and quarters for easier printing, fewer overhangs, smaller printers, etc.)
Includes a shoulder pauldron, finger plug, and forehead plate.
The shoulder pauldron has on the inside for the installation of a chicago screw for rigging.
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...