Dangerous Ladies' 3D models for the Durandal sword.
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes about 58" long, sliced for a 220mm tall printer. We've included both a short and a long handle, but the short is the default.
Assembles on a 48" long dowel, 3/4" diameter, and uses 10 1/4" dowel pins for alignment. The dowel pins can be omitted if desired but they make assembly a little easier.
Gems print all separately.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes about 58" long, sliced for a 220mm tall printer. We've included both a short and a long handle, but the short is the default.
Assembles on a 48" long dowel, 3/4" diameter, and uses 10 1/4" dowel pins for alignment. The dowel pins can be omitted if desired but they make assembly a little easier.
Gems print all separately.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for the Durandal sword.
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes about 58" long, sliced for a 220mm tall printer. We've included both a short and a long handle, but the short is the default.
Assembles on a 48" long dowel, 3/4" diameter, and uses 10 1/4" dowel pins for alignment. The dowel pins can be omitted if desired but they make assembly a little easier.
Gems print all separately.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Cole Nielsen (@_craftcentric)
.stl format. Finishes about 58" long, sliced for a 220mm tall printer. We've included both a short and a long handle, but the short is the default.
Assembles on a 48" long dowel, 3/4" diameter, and uses 10 1/4" dowel pins for alignment. The dowel pins can be omitted if desired but they make assembly a little easier.
Gems print all separately.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...