![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Scathach's Lances [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/scathachs-lances-3d-print-files-334279.jpg?v=1707156172)
![Scathach's Lances [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/scathachs-lances-3d-print-files-358342.jpg?v=1707156172)
![Scathach's Lances [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/scathachs-lances-3d-print-files-556838.jpg?v=1707156172)
![Scathach's Lances [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/scathachs-lances-3d-print-files-350203.jpg?v=1707156172)
Dangerous Ladies' 3D models for Scathach's lances
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Model is set up to use a 3/4" PVC pipe. The blades use 1/4" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable.
The decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.
Files include:
- Reference images
- LONG lance .stl files
- SHORT lance .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Model is set up to use a 3/4" PVC pipe. The blades use 1/4" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable.
The decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.
Files include:
- Reference images
- LONG lance .stl files
- SHORT lance .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Scathach's Lances [3D Print Files]
SKU: 40
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Scathach's lances
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Model is set up to use a 3/4" PVC pipe. The blades use 1/4" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable.
The decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.
Files include:
- Reference images
- LONG lance .stl files
- SHORT lance .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Model is set up to use a 3/4" PVC pipe. The blades use 1/4" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable.
The decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.
Files include:
- Reference images
- LONG lance .stl files
- SHORT lance .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...