Subscribe to our newsletter for 10% OFF!

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for Pyrrha's shield.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Shield finishes at approximately 23.5".

Sliced for a 250x250x300mm printer, but I've included a "whole shield" file as well for those of you with giant printers or with your own slicing preferences. If you're not sure if it'll fit, just see if your printer can take 300mm in any direction on the base –– diagonally works! If you want to print on a 200x200x200mm printer, you need to print it at 84% scale, which would make the final shield about 20" across. This is still pretty big!

To my understanding this shield is supposed to magically float or magnet to her bracer, but for those of us on the mortal plane, I've included posts for straps to be installed. There are little caps that can be plugged into them to pin the strap into place with a bit of glue.

Files include:
- Photos
- .STL files

We printed ours at 0.1-0.15 layers.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Sale

Pyrrha's Shield [3D Print Files]

SKU: 1985
Regular price $15.00 $12.75 15% off
Unit price
per 
Instant Download
Email Delivery

Shipped and Made Consciously. Read More

Need help? Contact us

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Dangerous Ladies' 3D models for Pyrrha's shield.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Shield finishes at approximately 23.5".

Sliced for a 250x250x300mm printer, but I've included a "whole shield" file as well for those of you with giant printers or with your own slicing preferences. If you're not sure if it'll fit, just see if your printer can take 300mm in any direction on the base –– diagonally works! If you want to print on a 200x200x200mm printer, you need to print it at 84% scale, which would make the final shield about 20" across. This is still pretty big!

To my understanding this shield is supposed to magically float or magnet to her bracer, but for those of us on the mortal plane, I've included posts for straps to be installed. There are little caps that can be plugged into them to pin the strap into place with a bit of glue.

Files include:
- Photos
- .STL files

We printed ours at 0.1-0.15 layers.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more