![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-192784.jpg?v=1707155847)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-992371.jpg?v=1707155847)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-110141.jpg?v=1707155847)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-209047.jpg?v=1707155847)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-230153.jpg?v=1707155847)
![Mio's Chakram Rings [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mios-chakram-rings-3d-print-files-885858.jpg?v=1707155847)
Dangerous Ladies' 3D models for Mio's Chakrams
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 22cmx22cmx25cm bed. Finish at approx. 15.75" across.
You can glue it together in one piece permanently, or you can use the included magnet slots (1/2") to make the whole thing come apart in two pieces, front and back -- this is super handy if you want to make it light up, as it is hollow! The blade on the outer edge prints separately and can be slotted into position from the side.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 22cmx22cmx25cm bed. Finish at approx. 15.75" across.
You can glue it together in one piece permanently, or you can use the included magnet slots (1/2") to make the whole thing come apart in two pieces, front and back -- this is super handy if you want to make it light up, as it is hollow! The blade on the outer edge prints separately and can be slotted into position from the side.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Sale
Mio's Chakram Rings [3D Print Files]
SKU: 586
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Mio's Chakrams
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 22cmx22cmx25cm bed. Finish at approx. 15.75" across.
You can glue it together in one piece permanently, or you can use the included magnet slots (1/2") to make the whole thing come apart in two pieces, front and back -- this is super handy if you want to make it light up, as it is hollow! The blade on the outer edge prints separately and can be slotted into position from the side.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 22cmx22cmx25cm bed. Finish at approx. 15.75" across.
You can glue it together in one piece permanently, or you can use the included magnet slots (1/2") to make the whole thing come apart in two pieces, front and back -- this is super handy if you want to make it light up, as it is hollow! The blade on the outer edge prints separately and can be slotted into position from the side.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...