![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![May's Anchor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mays-anchor-3d-print-files-590635.png?v=1707155680)
![May's Anchor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mays-anchor-3d-print-files-409570.png?v=1707155680)
![May's Anchor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mays-anchor-3d-print-files-402188.png?v=1707155680)
![May's Anchor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mays-anchor-3d-print-files-339410.png?v=1707155680)
![May's Anchor [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mays-anchor-3d-print-files-982531.png?v=1707155680)
Dangerous Ladies' 3D models for May's anchor!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" from top to bottom, with a 36" wingspan. The arms come off on posts with magnet slots at the ends so you can dismantle it for travel.
Sliced for a 300mm tall printer, but I've included whole versions for folks who'd like to cut their own.
The tolerance on the arms' post is tight enough that you may not need to use magnets to secure them, but if you decide to use the magnets on the arms, you'll need either 4 or 8 1" magnets, depending on whether you'd like to use both slots. I think 4 should more than suffice but it depends on what you can find.
These magnets are ideal and support 35lbs each so like, those arms are not gonna come off unless you yank them off.
http://www.omomagnets.com/index.php?controller=omoproduct&id_product=1097
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" from top to bottom, with a 36" wingspan. The arms come off on posts with magnet slots at the ends so you can dismantle it for travel.
Sliced for a 300mm tall printer, but I've included whole versions for folks who'd like to cut their own.
The tolerance on the arms' post is tight enough that you may not need to use magnets to secure them, but if you decide to use the magnets on the arms, you'll need either 4 or 8 1" magnets, depending on whether you'd like to use both slots. I think 4 should more than suffice but it depends on what you can find.
These magnets are ideal and support 35lbs each so like, those arms are not gonna come off unless you yank them off.
http://www.omomagnets.com/index.php?controller=omoproduct&id_product=1097
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
May's Anchor [3D Print Files]
SKU: 1187
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for May's anchor!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" from top to bottom, with a 36" wingspan. The arms come off on posts with magnet slots at the ends so you can dismantle it for travel.
Sliced for a 300mm tall printer, but I've included whole versions for folks who'd like to cut their own.
The tolerance on the arms' post is tight enough that you may not need to use magnets to secure them, but if you decide to use the magnets on the arms, you'll need either 4 or 8 1" magnets, depending on whether you'd like to use both slots. I think 4 should more than suffice but it depends on what you can find.
These magnets are ideal and support 35lbs each so like, those arms are not gonna come off unless you yank them off.
http://www.omomagnets.com/index.php?controller=omoproduct&id_product=1097
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" from top to bottom, with a 36" wingspan. The arms come off on posts with magnet slots at the ends so you can dismantle it for travel.
Sliced for a 300mm tall printer, but I've included whole versions for folks who'd like to cut their own.
The tolerance on the arms' post is tight enough that you may not need to use magnets to secure them, but if you decide to use the magnets on the arms, you'll need either 4 or 8 1" magnets, depending on whether you'd like to use both slots. I think 4 should more than suffice but it depends on what you can find.
These magnets are ideal and support 35lbs each so like, those arms are not gonna come off unless you yank them off.
http://www.omomagnets.com/index.php?controller=omoproduct&id_product=1097
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...