Dangerous Ladies' 3D model for Lysithea and Lorenz’s Thyrsus hero relic.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 200x200x200 or 220x200x300 bed. Finishes at 30”. Includes a mostly whole version, a flat version, and an upright version; the flat should be easiest for larger beds, the upright version is easiest for smaller printers.

The collet and head connect on a joint; if you print this really durably you should be able to pop this on and off for travel instead of gluing it permanently.

The crest stone is best done on a resin printer but you can do it FDM on the highest possible settings. We also sell crest stones individually if you want a clear red resin one to go with your printed project.

Thyrsus assembles on a 5/8” dowel handle, cut 15” long. If you print everything at 121% you can use a 3/4” dowel cut 18” long, but the staff will finish at 36” instead.

The spikes are all attached to the head with 2” long segments of 1/8” dowel; you’ll need four of them. I suggest using brass or acrylic pins for this, as they’re a little more durable than wooden dowels.

Files include:
- Reference images
- .stl files

We printed using 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Looking for a sewing pattern for this costume? Our friends got you covered! Indigo Patterns - Time Skip Lysithea Sewing Pattern