![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Laudna's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/laudnas-accessories-3d-print-files-157633.jpg?v=1707155566)
![Laudna's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/laudnas-accessories-3d-print-files-731516.jpg?v=1707155566)
![Laudna's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/laudnas-accessories-3d-print-files-289141.jpg?v=1707155566)
Dangerous Ladies' 3D models for Laudna’s Accessories.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Most pieces will fit on any printer, but the scissors and the hair stick in whole versions will need up to 300mm. I’ve included cut versions for most larger things. The hair stick’s stick can be replaced with a 3/8” dowel.
The rat’s tail is tricky; if you print it in filament, you can use a heat gun to bend the tip into a knot, but go slow and careful so it doesn’t melt. You may find it easier just to replace the tail for 3/8” cord or satin braid.
Remember to tie a bow around your rat’s neck!
Files include:
- Photos
- .STL files
We printed ours at 0.15 mm layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Most pieces will fit on any printer, but the scissors and the hair stick in whole versions will need up to 300mm. I’ve included cut versions for most larger things. The hair stick’s stick can be replaced with a 3/8” dowel.
The rat’s tail is tricky; if you print it in filament, you can use a heat gun to bend the tip into a knot, but go slow and careful so it doesn’t melt. You may find it easier just to replace the tail for 3/8” cord or satin braid.
Remember to tie a bow around your rat’s neck!
Files include:
- Photos
- .STL files
We printed ours at 0.15 mm layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Materials: digital file
Laudna's Accessories [3D Print Files]
SKU: 66
Instant Download
Email Delivery
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
High quality stl files that allow you to print what you want. I love that I can make my boy over and over again.
The raven skull is perfection
Dangerous Ladies' 3D models for Laudna’s Accessories.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Most pieces will fit on any printer, but the scissors and the hair stick in whole versions will need up to 300mm. I’ve included cut versions for most larger things. The hair stick’s stick can be replaced with a 3/8” dowel.
The rat’s tail is tricky; if you print it in filament, you can use a heat gun to bend the tip into a knot, but go slow and careful so it doesn’t melt. You may find it easier just to replace the tail for 3/8” cord or satin braid.
Remember to tie a bow around your rat’s neck!
Files include:
- Photos
- .STL files
We printed ours at 0.15 mm layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Most pieces will fit on any printer, but the scissors and the hair stick in whole versions will need up to 300mm. I’ve included cut versions for most larger things. The hair stick’s stick can be replaced with a 3/8” dowel.
The rat’s tail is tricky; if you print it in filament, you can use a heat gun to bend the tip into a knot, but go slow and careful so it doesn’t melt. You may find it easier just to replace the tail for 3/8” cord or satin braid.
Remember to tie a bow around your rat’s neck!
Files include:
- Photos
- .STL files
We printed ours at 0.15 mm layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...