Dangerous Ladies' 3D models for Edelgard's Aymr relic.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Finishes at 55" long.

Pre-sliced for printing on 200x200x300 bed. Many pieces will fit on a 200mm tall bed, but a couple of the blade pieces won't. Printing it at 50% (for a finished length of 27.5") will drop it small enough, but you'll have to recalculate the internal dowels.

Update May 4th 2021: I've added recut files for 250mm tall printers!

Amyr has a LOT of internal support dowel channels; this is the ONLY way to make a prop shaped like this structurally sound. A chart is included with placement for everything.

1/2" DOWEL SEGMENTS:
7” x2
11" x1
3.5” x1
15" x1
14" x1

1" DOWEL SEGMENTS:
3.75" x2
11” x1
3.5" x1
15" x1

1.25" DOWEL SEGMENT for handle:
30" x1

You can make this collapsible for travel by not permanently gluing some of the dowels. The segments (base, mid and blade) "cup" into each other. You will want to experiment with this a little!

Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

Looking for a sewing pattern for this costume? Our friends got you covered!

• Indigo Patterns - Emperor Edelgard Sewing Pattern
• Indigo Patterns - Warriors Edelgard Sewing Pattern