![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-561035.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-332447.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-709750.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-163166.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-854231.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-674679.png?v=1707156370)
![White Mage's Bunny's Crescent [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-3d-print-files-620774.png?v=1707156370)
Dangerous Ladies' 3D models for the Bunny Crescent!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but many pieces will fit smaller. Finishes 62" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The handle assembles on a 1/2" dowel, cut 43.5" long.
UPDATE 1/15/2024: I now have included a hollow moon head. The key at the top has a slot so you can remove the moon/lazy bunny to access the insides if you want to put lights in or something. I've also included a variant of the lazy bunny's bottom where a part of his thigh is cut away on the inside; it shouldn't change much visually but it makes it easier to get the bunny on and off his key.
All of the bunnies print separately; from top to bottom, they are Lazy, Sneaky, Speedy and Confidence. There are both untextured and textured versions; there's no particular reason to print the untextured versions but they're there if you might want them. Because they print separately, you're also welcome to skip them entirely and use some other medium to create the little darlings.
The flowers print separately as well, and they are the trickiest prints in the lot. You can also replace them with silk/fabric flowers if you prefer; there's slots in the moon and handle for them to attach with, and slots in each flower to attach your own stamen, which could be made out of pipe cleaner, wire, etc.
The moon head and flowers attach to the body with dowel pins; 1/4" diameter, 1" long.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but many pieces will fit smaller. Finishes 62" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The handle assembles on a 1/2" dowel, cut 43.5" long.
UPDATE 1/15/2024: I now have included a hollow moon head. The key at the top has a slot so you can remove the moon/lazy bunny to access the insides if you want to put lights in or something. I've also included a variant of the lazy bunny's bottom where a part of his thigh is cut away on the inside; it shouldn't change much visually but it makes it easier to get the bunny on and off his key.
All of the bunnies print separately; from top to bottom, they are Lazy, Sneaky, Speedy and Confidence. There are both untextured and textured versions; there's no particular reason to print the untextured versions but they're there if you might want them. Because they print separately, you're also welcome to skip them entirely and use some other medium to create the little darlings.
The flowers print separately as well, and they are the trickiest prints in the lot. You can also replace them with silk/fabric flowers if you prefer; there's slots in the moon and handle for them to attach with, and slots in each flower to attach your own stamen, which could be made out of pipe cleaner, wire, etc.
The moon head and flowers attach to the body with dowel pins; 1/4" diameter, 1" long.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
White Mage's Bunny's Crescent [3D Print Files]
SKU: 1584
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for the Bunny Crescent!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but many pieces will fit smaller. Finishes 62" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The handle assembles on a 1/2" dowel, cut 43.5" long.
UPDATE 1/15/2024: I now have included a hollow moon head. The key at the top has a slot so you can remove the moon/lazy bunny to access the insides if you want to put lights in or something. I've also included a variant of the lazy bunny's bottom where a part of his thigh is cut away on the inside; it shouldn't change much visually but it makes it easier to get the bunny on and off his key.
All of the bunnies print separately; from top to bottom, they are Lazy, Sneaky, Speedy and Confidence. There are both untextured and textured versions; there's no particular reason to print the untextured versions but they're there if you might want them. Because they print separately, you're also welcome to skip them entirely and use some other medium to create the little darlings.
The flowers print separately as well, and they are the trickiest prints in the lot. You can also replace them with silk/fabric flowers if you prefer; there's slots in the moon and handle for them to attach with, and slots in each flower to attach your own stamen, which could be made out of pipe cleaner, wire, etc.
The moon head and flowers attach to the body with dowel pins; 1/4" diameter, 1" long.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but many pieces will fit smaller. Finishes 62" from end to end. I've included whole versions of the moon and handle for those who would like to cut it themselves.
The handle assembles on a 1/2" dowel, cut 43.5" long.
UPDATE 1/15/2024: I now have included a hollow moon head. The key at the top has a slot so you can remove the moon/lazy bunny to access the insides if you want to put lights in or something. I've also included a variant of the lazy bunny's bottom where a part of his thigh is cut away on the inside; it shouldn't change much visually but it makes it easier to get the bunny on and off his key.
All of the bunnies print separately; from top to bottom, they are Lazy, Sneaky, Speedy and Confidence. There are both untextured and textured versions; there's no particular reason to print the untextured versions but they're there if you might want them. Because they print separately, you're also welcome to skip them entirely and use some other medium to create the little darlings.
The flowers print separately as well, and they are the trickiest prints in the lot. You can also replace them with silk/fabric flowers if you prefer; there's slots in the moon and handle for them to attach with, and slots in each flower to attach your own stamen, which could be made out of pipe cleaner, wire, etc.
The moon head and flowers attach to the body with dowel pins; 1/4" diameter, 1" long.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...