Dangerous Ladies' 3D models for Thancred's Gunbreaker weapon, Lionheart.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 42". Pre-sliced for printing on a 20cmx20cmx30cm bed, with internal dowel slots for strength and keys for alignment. (Update: We have uploaded alternate pieces for a bed 25cm tall; that should help!) (Update 01/06/2022 - I've uploaded a v2 of the spike and salt shaker cap to match the CG art. These are optional alternate prints.)
The drum can be set up to spin. It mounts on the center dowel; there are two spacer rings that can be glued on either side of it to keep it in place. Alternately, if you do not wish for it to spin, you can just glue the drum in place.
There are two center dowels:
20.5" long 1/2" dowel for lower blade
19" long 1/2" dowel for handle/upper blade
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Dangerous Ladies' 3D models for Thancred's Gunbreaker weapon, Lionheart.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 42". Pre-sliced for printing on a 20cmx20cmx30cm bed, with internal dowel slots for strength and keys for alignment. (Update: We have uploaded alternate pieces for a bed 25cm tall; that should help!) (Update 01/06/2022 - I've uploaded a v2 of the spike and salt shaker cap to match the CG art. These are optional alternate prints.)
The drum can be set up to spin. It mounts on the center dowel; there are two spacer rings that can be glued on either side of it to keep it in place. Alternately, if you do not wish for it to spin, you can just glue the drum in place.
There are two center dowels:
20.5" long 1/2" dowel for lower blade
19" long 1/2" dowel for handle/upper blade
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...