Dangerous Ladies' 3D models for Nymeia's Spinning Wheel.
Model by Jennifer Rezny (@quicksparrows)
.stl format. THIS IS A MASSIVE PROJECT AT FULL SCALE. The structure finishes at about 45" wide, 65" wide, and 18" deep. There is no meaningful way to make a design like this anything but heavy, cumbersome and difficult to wear. It is designed to be mounted on a 1" dowel or rod; though it includes a backplate file, I strongly suggest just mounting it on a post on wheels instead of trying to wear it. I am not responsible for this being unwearable, or the results of trying to wear this.
I strongly recommend using thin walls and a low infill. It will make the pieces fragile but they will be a bearable weight. Many pieces are hollow to reduce weight but some remain solid for durability without adding too much weight. I do not recommend foam filling these; it will be heavier than infill.
If you do the backplate, I STRONGLY recommend fiberglassing it for durability.
You should also dry fit everything before using any glue.
Assembles on the following internal supports:
Main support: 1085mm of 1" dowel (or ideally, hollow aluminum)
Back support pillar: 639mm of 1" dowel (or ideally, hollow aluminum)
Wheel axel: 160mm of 1/2"
Horizontal bars internal rod: 365mm of 1/4" x2
Long spoke: 220mm of 3/4" x8
Short spoke: 98mm of 3/4" x8
Spike A axel: 144mm of 1/4"
Spool arm: 166mm of 1/2"
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for Nymeia's Spinning Wheel.
Model by Jennifer Rezny (@quicksparrows)
.stl format. THIS IS A MASSIVE PROJECT AT FULL SCALE. The structure finishes at about 45" wide, 65" wide, and 18" deep. There is no meaningful way to make a design like this anything but heavy, cumbersome and difficult to wear. It is designed to be mounted on a 1" dowel or rod; though it includes a backplate file, I strongly suggest just mounting it on a post on wheels instead of trying to wear it. I am not responsible for this being unwearable, or the results of trying to wear this.
I strongly recommend using thin walls and a low infill. It will make the pieces fragile but they will be a bearable weight. Many pieces are hollow to reduce weight but some remain solid for durability without adding too much weight. I do not recommend foam filling these; it will be heavier than infill.
If you do the backplate, I STRONGLY recommend fiberglassing it for durability.
You should also dry fit everything before using any glue.
Assembles on the following internal supports:
Main support: 1085mm of 1" dowel (or ideally, hollow aluminum)
Back support pillar: 639mm of 1" dowel (or ideally, hollow aluminum)
Wheel axel: 160mm of 1/2"
Horizontal bars internal rod: 365mm of 1/4" x2
Long spoke: 220mm of 3/4" x8
Short spoke: 98mm of 3/4" x8
Spike A axel: 144mm of 1/4"
Spool arm: 166mm of 1/2"
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...