![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Llymlaen's Tiara [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/llymlaens-tiara-3d-print-files-680798.png?v=1707155891)
![Llymlaen's Tiara [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/llymlaens-tiara-3d-print-files-556345.png?v=1707155891)
![Llymlaen's Tiara [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/llymlaens-tiara-3d-print-files-554510.png?v=1707155891)
Dangerous Ladies' 3D models for Llymlaen's tiara.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm bed, but many pieces will fit shorter. I've included both a whole and a split up version.
It includes two "headbands" that can be worn under the wig, with a prong on the side that the wings slot onto. One headband has more coverage, the other less. Both should offer sufficient support, especially with the wig overtop to hold it in place.
The tiara piece on front can be printed flat with very thick top layers and then heat formed into whatever shape you need.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm bed, but many pieces will fit shorter. I've included both a whole and a split up version.
It includes two "headbands" that can be worn under the wig, with a prong on the side that the wings slot onto. One headband has more coverage, the other less. Both should offer sufficient support, especially with the wig overtop to hold it in place.
The tiara piece on front can be printed flat with very thick top layers and then heat formed into whatever shape you need.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Llymlaen's Tiara [3D Print Files]
SKU: 1691
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Llymlaen's tiara.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm bed, but many pieces will fit shorter. I've included both a whole and a split up version.
It includes two "headbands" that can be worn under the wig, with a prong on the side that the wings slot onto. One headband has more coverage, the other less. Both should offer sufficient support, especially with the wig overtop to hold it in place.
The tiara piece on front can be printed flat with very thick top layers and then heat formed into whatever shape you need.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm bed, but many pieces will fit shorter. I've included both a whole and a split up version.
It includes two "headbands" that can be worn under the wig, with a prong on the side that the wings slot onto. One headband has more coverage, the other less. Both should offer sufficient support, especially with the wig overtop to hold it in place.
The tiara piece on front can be printed flat with very thick top layers and then heat formed into whatever shape you need.
Files include:
- Photos
- .STL files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...