Description
A 3D printed kit for Dimitri's Academy Armour.
In order to properly fit you, we will need the following measurements:
-
Thigh circumference
- Knee circumference
- Ankle circumference
- Wrist circumference
- Elbow circumference
- Shoe size
- Ring sizes for all fingers - must be measured while wearing gloves!
The calves split side to side; I’ve included some “shim” pieces you can use to align the pieces with each other. I suggest putting a piece of elastic on the inside going from side to side so you can pull it apart far enough to get your leg through, and then release to pull taut. The shims will keep the pieces aligned.
Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!
Description
A 3D printed kit for Dimitri's Academy Armour.
In order to properly fit you, we will need the following measurements:
-
Thigh circumference
- Knee circumference
- Ankle circumference
- Wrist circumference
- Elbow circumference
- Shoe size
- Ring sizes for all fingers - must be measured while wearing gloves!
The calves split side to side; I’ve included some “shim” pieces you can use to align the pieces with each other. I suggest putting a piece of elastic on the inside going from side to side so you can pull it apart far enough to get your leg through, and then release to pull taut. The shims will keep the pieces aligned.
Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!
Reviews
Finishing Guides
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.