![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-342104.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-383408.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-559579.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-729385.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-638062.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-825724.jpg?v=1707155570)
![Link, Revali, and Tulin's Great Eagle Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/link-revali-and-tulins-great-eagle-bow-3d-print-files-700916.jpg?v=1707155570)
Dangerous Ladies' 3D models for Link, Revali and Tulin's Great Eagle Bow.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed with some pieces for 20cmx20x30cm, with internal keys and dowel channels for strength and alignment. Dowel channel for center of bow takes a square dowel so the arm does not rotate; this way you can disassemble the bow for travel.
Files include:
- Photos
- .STL files
Bow uses three 5.5" and one 11" dowel (1/2" diameter) for the shafts, and a 1/2" square dowel for the center.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed with some pieces for 20cmx20x30cm, with internal keys and dowel channels for strength and alignment. Dowel channel for center of bow takes a square dowel so the arm does not rotate; this way you can disassemble the bow for travel.
Files include:
- Photos
- .STL files
Bow uses three 5.5" and one 11" dowel (1/2" diameter) for the shafts, and a 1/2" square dowel for the center.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Sale
Link, Revali, and Tulin's Great Eagle Bow [3D Print Files]
SKU: 464
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Link, Revali and Tulin's Great Eagle Bow.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed with some pieces for 20cmx20x30cm, with internal keys and dowel channels for strength and alignment. Dowel channel for center of bow takes a square dowel so the arm does not rotate; this way you can disassemble the bow for travel.
Files include:
- Photos
- .STL files
Bow uses three 5.5" and one 11" dowel (1/2" diameter) for the shafts, and a 1/2" square dowel for the center.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed with some pieces for 20cmx20x30cm, with internal keys and dowel channels for strength and alignment. Dowel channel for center of bow takes a square dowel so the arm does not rotate; this way you can disassemble the bow for travel.
Files include:
- Photos
- .STL files
Bow uses three 5.5" and one 11" dowel (1/2" diameter) for the shafts, and a 1/2" square dowel for the center.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...