![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Makoto/Protagonist Reload Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/minato-or-makotos-reload-sword-3d-print-files-942992.png?v=1707156043)
![Makoto/Protagonist Reload Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/minato-or-makotos-reload-sword-3d-print-files-106644.png?v=1707156043)
![Makoto/Protagonist Reload Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/minato-or-makotos-reload-sword-3d-print-files-997996.png?v=1707156043)
Dangerous Ladies' 3D models for Makoto's Reload Sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 40".
Assembles on a 1/4" rod for the handle, cut 36" long. I prefer steel for this but you can use a wooden dowel too.
If you want to wrap the handle in carbon fibre vinyl or similar, I suggest scaling everything up the handle and SEES button up by 1%, and the button down by 1%.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 40".
Assembles on a 1/4" rod for the handle, cut 36" long. I prefer steel for this but you can use a wooden dowel too.
If you want to wrap the handle in carbon fibre vinyl or similar, I suggest scaling everything up the handle and SEES button up by 1%, and the button down by 1%.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Makoto/Protagonist Reload Sword [3D Print Files]
SKU: 1720
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Makoto's Reload Sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 40".
Assembles on a 1/4" rod for the handle, cut 36" long. I prefer steel for this but you can use a wooden dowel too.
If you want to wrap the handle in carbon fibre vinyl or similar, I suggest scaling everything up the handle and SEES button up by 1%, and the button down by 1%.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 40".
Assembles on a 1/4" rod for the handle, cut 36" long. I prefer steel for this but you can use a wooden dowel too.
If you want to wrap the handle in carbon fibre vinyl or similar, I suggest scaling everything up the handle and SEES button up by 1%, and the button down by 1%.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...