![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Noctis' Sword of the Father [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/noctis-sword-of-the-father-3d-print-files-235681.jpg?v=1707155873)
![Noctis' Sword of the Father [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/noctis-sword-of-the-father-3d-print-files-869644.jpg?v=1707155873)
![Noctis' Sword of the Father [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/noctis-sword-of-the-father-3d-print-files-329641.jpg?v=1707155873)
Dangerous Ladies' 3D model for Noctis and Regis' "Sword of the Father" from Final Fantasy XV.
Model by Jennifer Rezny (@quicksparrows)
.stl format.
48" sword. Pre-sliced for printing on a 20cmx20cmx20cm bed.
The Sword of the Father uses internal dowels for alignment and strength. Please see requirements below:
Center: 43.5" of 3/8"
Side rods: 30" of 3/8" x2
Pegs: 1" of 1/4" x2
It also requires wire for the long side lever.
Files include:
- Reference images
- Print files
- Vector and .png files for the filigree
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format.
48" sword. Pre-sliced for printing on a 20cmx20cmx20cm bed.
The Sword of the Father uses internal dowels for alignment and strength. Please see requirements below:
Center: 43.5" of 3/8"
Side rods: 30" of 3/8" x2
Pegs: 1" of 1/4" x2
It also requires wire for the long side lever.
Files include:
- Reference images
- Print files
- Vector and .png files for the filigree
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Noctis' Sword of the Father [3D Print Files]
SKU: 281
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D model for Noctis and Regis' "Sword of the Father" from Final Fantasy XV.
Model by Jennifer Rezny (@quicksparrows)
.stl format.
48" sword. Pre-sliced for printing on a 20cmx20cmx20cm bed.
The Sword of the Father uses internal dowels for alignment and strength. Please see requirements below:
Center: 43.5" of 3/8"
Side rods: 30" of 3/8" x2
Pegs: 1" of 1/4" x2
It also requires wire for the long side lever.
Files include:
- Reference images
- Print files
- Vector and .png files for the filigree
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format.
48" sword. Pre-sliced for printing on a 20cmx20cmx20cm bed.
The Sword of the Father uses internal dowels for alignment and strength. Please see requirements below:
Center: 43.5" of 3/8"
Side rods: 30" of 3/8" x2
Pegs: 1" of 1/4" x2
It also requires wire for the long side lever.
Files include:
- Reference images
- Print files
- Vector and .png files for the filigree
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...