![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Edda's Blackbosom Scythe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/eddas-blackbosom-scythe-3d-print-files-762803.jpg?v=1707155303)
![Edda's Blackbosom Scythe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/eddas-blackbosom-scythe-3d-print-files-540536.jpg?v=1707155303)
![Edda's Blackbosom Scythe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/eddas-blackbosom-scythe-3d-print-files-515962.jpg?v=1707155303)
![Edda's Blackbosom Scythe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/eddas-blackbosom-scythe-3d-print-files-748676.jpg?v=1707155303)
![Edda's Blackbosom Scythe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/eddas-blackbosom-scythe-3d-print-files-580809.jpg?v=1707155303)
Dangerous Ladies' 3D models for Edda's "Blackbosom" scythe.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal dowel slots for strength and keys for alignment. Scythe is designed to disassemble in four pieces for travel/storage; two handle pieces, the crest/head and the blade.
Files include:
- Photos
- .STL files
Printed file requires the following hardware:
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal dowel slots for strength and keys for alignment. Scythe is designed to disassemble in four pieces for travel/storage; two handle pieces, the crest/head and the blade.
Files include:
- Photos
- .STL files
Printed file requires the following hardware:
- Bottom handle: 20" long 1/2" dowel
- Blade: 8.25" long 1/4" dowel x2, 2.75" long 1/4" dowel x2
- Center: 5" long 5/8" dowel x1
- Upper handle: 6.5" long 5/8" dowel x1
- Bolts: 1/4" bolt, 2" long x1, 1/4" bolt, 1.5" long x2
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Edda's Blackbosom Scythe [3D Print Files]
SKU: 528
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Edda's "Blackbosom" scythe.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal dowel slots for strength and keys for alignment. Scythe is designed to disassemble in four pieces for travel/storage; two handle pieces, the crest/head and the blade.
Files include:
- Photos
- .STL files
Printed file requires the following hardware:
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal dowel slots for strength and keys for alignment. Scythe is designed to disassemble in four pieces for travel/storage; two handle pieces, the crest/head and the blade.
Files include:
- Photos
- .STL files
Printed file requires the following hardware:
- Bottom handle: 20" long 1/2" dowel
- Blade: 8.25" long 1/4" dowel x2, 2.75" long 1/4" dowel x2
- Center: 5" long 5/8" dowel x1
- Upper handle: 6.5" long 5/8" dowel x1
- Bolts: 1/4" bolt, 2" long x1, 1/4" bolt, 1.5" long x2
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...