![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Zhongli's Memory of Dust Catalyst [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/zhonglis-memory-of-dust-catalyst-3d-print-files-178633.jpg?v=1707156611)
![Zhongli's Memory of Dust Catalyst [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/zhonglis-memory-of-dust-catalyst-3d-print-files-507321.jpg?v=1707156611)
![Zhongli's Memory of Dust Catalyst [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/zhonglis-memory-of-dust-catalyst-3d-print-files-225387.jpg?v=1707156611)
![Zhongli's Memory of Dust Catalyst [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/zhonglis-memory-of-dust-catalyst-3d-print-files-501936.jpg?v=1707156611)
Dangerous Ladies' 3D models for the Memory of Dust catalyst.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 300mm or taller (though many pieces will fit smaller) and finishes at about 29cm across. You need a bed at least 200mmx200mm for the centre box!
There is a hollow version and a solid version. It is a very long print at full size but it's an interesting project!
There are two small holes on the inside edge of the hollow one; this is so you can run a string into it and hold it up so it floats.
The top cap comes off with magnets to access the inside, where there are various hatches and whatnot for battery storage.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 300mm or taller (though many pieces will fit smaller) and finishes at about 29cm across. You need a bed at least 200mmx200mm for the centre box!
There is a hollow version and a solid version. It is a very long print at full size but it's an interesting project!
There are two small holes on the inside edge of the hollow one; this is so you can run a string into it and hold it up so it floats.
The top cap comes off with magnets to access the inside, where there are various hatches and whatnot for battery storage.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Sale
Zhongli's Memory of Dust Catalyst [3D Print Files]
SKU: 558
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for the Memory of Dust catalyst.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 300mm or taller (though many pieces will fit smaller) and finishes at about 29cm across. You need a bed at least 200mmx200mm for the centre box!
There is a hollow version and a solid version. It is a very long print at full size but it's an interesting project!
There are two small holes on the inside edge of the hollow one; this is so you can run a string into it and hold it up so it floats.
The top cap comes off with magnets to access the inside, where there are various hatches and whatnot for battery storage.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 300mm or taller (though many pieces will fit smaller) and finishes at about 29cm across. You need a bed at least 200mmx200mm for the centre box!
There is a hollow version and a solid version. It is a very long print at full size but it's an interesting project!
There are two small holes on the inside edge of the hollow one; this is so you can run a string into it and hold it up so it floats.
The top cap comes off with magnets to access the inside, where there are various hatches and whatnot for battery storage.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...