![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Lumine and Aether's Traveller's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/lumine-and-aethers-travellers-sword-3d-print-files-943709.png?v=1707155839)
![Lumine and Aether's Traveller's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/lumine-and-aethers-travellers-sword-3d-print-files-192520.png?v=1707155839)
![Lumine and Aether's Traveller's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/lumine-and-aethers-travellers-sword-3d-print-files-191293.png?v=1707155839)
Dangerous Ladies' 3D models for the Travellers' original swords.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 200mm or taller, but there are some cuts for taller printers. Finishes at 46.5" from end to end. The crossguards are interchangeable so you can print either Lumine or Aether's sword.
Assembles with the following dowels:
11.5" of 1/2" dowel (for handle)
27.75" of 1/2" dowel (for blade)
If you print the crossguard halves instead of whole, there are slots to push 1/4" dowels inside the crossguard to give them more strength. Make sure you shove them all the way in with a pen tip or other tool so that it doesn't impede the main dowel.
Lumine: 2.75" of 1/4", x2
Aether: 5.75" of 1/4", x2
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 200mm or taller, but there are some cuts for taller printers. Finishes at 46.5" from end to end. The crossguards are interchangeable so you can print either Lumine or Aether's sword.
Assembles with the following dowels:
11.5" of 1/2" dowel (for handle)
27.75" of 1/2" dowel (for blade)
If you print the crossguard halves instead of whole, there are slots to push 1/4" dowels inside the crossguard to give them more strength. Make sure you shove them all the way in with a pen tip or other tool so that it doesn't impede the main dowel.
Lumine: 2.75" of 1/4", x2
Aether: 5.75" of 1/4", x2
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale
Lumine and Aether's Traveller's Sword [3D Print Files]
SKU: 1038
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for the Travellers' original swords.
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 200mm or taller, but there are some cuts for taller printers. Finishes at 46.5" from end to end. The crossguards are interchangeable so you can print either Lumine or Aether's sword.
Assembles with the following dowels:
11.5" of 1/2" dowel (for handle)
27.75" of 1/2" dowel (for blade)
If you print the crossguard halves instead of whole, there are slots to push 1/4" dowels inside the crossguard to give them more strength. Make sure you shove them all the way in with a pen tip or other tool so that it doesn't impede the main dowel.
Lumine: 2.75" of 1/4", x2
Aether: 5.75" of 1/4", x2
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Models by Jennifer Rezny (@quicksparrows)
.stl format. Fits printers 200mm or taller, but there are some cuts for taller printers. Finishes at 46.5" from end to end. The crossguards are interchangeable so you can print either Lumine or Aether's sword.
Assembles with the following dowels:
11.5" of 1/2" dowel (for handle)
27.75" of 1/2" dowel (for blade)
If you print the crossguard halves instead of whole, there are slots to push 1/4" dowels inside the crossguard to give them more strength. Make sure you shove them all the way in with a pen tip or other tool so that it doesn't impede the main dowel.
Lumine: 2.75" of 1/4", x2
Aether: 5.75" of 1/4", x2
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...