![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Freminet's "Pers the Penguin" Companion [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/freminets-pers-the-penguin-companion-3d-print-files-842364.png?v=1707155452)
![Freminet's "Pers the Penguin" Companion [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/freminets-pers-the-penguin-companion-3d-print-files-901159.png?v=1707155452)
![Freminet's "Pers the Penguin" Companion [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/freminets-pers-the-penguin-companion-3d-print-files-298754.png?v=1707155452)
![Freminet's "Pers the Penguin" Companion [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/freminets-pers-the-penguin-companion-3d-print-files-630122.png?v=1707155452)
Dangerous Ladies' 3D models for Freminet's Penguin.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Sliced for a printer roughly 200x200x200, but I've included some whole versions and alternate cuts that should make most printers viable for this. The penguin stands about 12" tall at default scale, but it scales up easily for other sizes!
The main body is hollow, and his hat pops off so you can access inside his body. His legs attach to a "hips" piece that attaches to the inside of the penguin body. The key on the back can be made to spin!
If you print the body in separate parts, you can use 1/4" dowel pegs to align the pieces.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
http://instagram.com/thedangerousladies
Freminet's "Pers the Penguin" Companion [3D Print Files]
Dangerous Ladies' 3D models for Freminet's Penguin.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Sliced for a printer roughly 200x200x200, but I've included some whole versions and alternate cuts that should make most printers viable for this. The penguin stands about 12" tall at default scale, but it scales up easily for other sizes!
The main body is hollow, and his hat pops off so you can access inside his body. His legs attach to a "hips" piece that attaches to the inside of the penguin body. The key on the back can be made to spin!
If you print the body in separate parts, you can use 1/4" dowel pegs to align the pieces.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...