Dangerous Ladies' 3D models for Aerith's Fairy of Snowfall staff.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Split for 250mm printers, but includes whole versions for those who want to recut it themselves. Finishes at 72".

Because of the design of this staff, the neck is somewhat fragile. I've reinforced it by running a rod from the neck through the staff head; this replaces the bulb inside the next unfortunately, but if you use a clear acrylic rod, it can blend into the design a little.

All of the "pistons" on the tips print hollow; this is so you can print them clear and paint/fill the inside purple.

The side wire on the neck is made out of a 1/8" ID piece of tubing (or similar). It's too fragile to print otherwise, as it can't print flat the way the head ones can.

Hardware needed:
Handle: 50" of 1/2" PVC pipe
Inner head: 16.75" of 1/4" clear acrylic rod

Files include:
- Photos
- .STL files

We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies