Dangerous Ladies' 3D models for Ganyu's accessories.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Should fit on most printers, but the horns and back dangle need a roughly 200x200mm footprint; you can get by with a little narrower or

There's two versions of the bell, one with the dangle permanently mounted and another with the dangle separate. You can attach this dangle by putting two screw eyes in the bell and dangle so the dangle can swing!

There are some pieces on this (like the collar pieces) that are meant to be flexible. If you print them very thin with a solid infill you can heat form them to curve, but it will be easier if you reduce the height by 50% so it's even thinner.

The horns have slots for both Chicago screws and magnets on the underside, so you can either put a 10mm wide Chicago screw in or you can use three 1/2" magnets (per horn.)

Looking for where the second underbust diamond goes? It goes on the back under the lower back piece; it's hidden by the large back piece.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.