{"title":"Dangerous Ladies Cosplay Kits","description":"\u003cp\u003eCustomizable and Accessible Cosplay Supplies!\u003c\/p\u003e\n\u003cp\u003eBrowse our full catalogue of .stl files, 3D Printed Props, Cast Kits, Cosplay Fabric, Embroidery Files, and more!\u003c\/p\u003e","products":[{"product_id":"impas-shin-armor-and-accessories-3d-print-files","title":"Impa's Shin Armor and Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Young Impa's accessories. Some of these items can also be used for Paya as she appears in Breath of the Wild and Tears of the Kingdom\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModel by Christine van Schaik (@horrificseance)\u003cbr\u003e\u003cbr\u003e.stl format. Includes variants on her shin armor for both 30cm and 20cm tall printers. Please test print everything so you can be sure of the size\/scale you like!\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063164891453,"sku":"44063164891453","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/impas-shin-armor-and-accessories-3d-print-files-905631.jpg?v=1751895298"},{"product_id":"graha-tias-scion-staff-3d-print-files","title":"G'raha Tia's Scion Staff [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for G'raha Tia's Scion staff.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003c\/p\u003e\n\u003cp\u003e.stl format. Cut for printing on a 250mm tall printer, but there are whole versions for larger printers. Finishes at 70\" proportionally, but you can make it longer or shorter by simply extending the dowel\/handle.\u003c\/p\u003e\n\u003cp\u003eThe crystal is hollow, so you can print it with a transparent filament and then install lights inside. You can access any electronics by not adhering the crystal permanently to the head and then removing it from its slot.\u003c\/p\u003e\n\u003cp\u003eAll variants of the staff other than the collapsible version assemble on a 1.25\" diameter dowel, cut 46\" long. You can also switch the dowel out for a 1\" ID PVC pipe by printing the file at 107% scale, but then your printer may need to be slightly taller!\u003c\/p\u003e\n\u003cp\u003eThis file includes versions where the crystal is separate from the head, and versions where the gems aren't attached to the body so you can print\/cast them separately. The standard version is my personal favourite cut but needs a 300mm tall printer to print if you want the seamless crystal; you can always use the Separate version's split crystal for shorter printers, though, you'll just have a seam.\u003c\/p\u003e\n\u003cp\u003eNEW June 27th 2025: I've added a collapsible version. This version is made to screw apart. There is a slot down the middle for a 3\/8\" or 8mm dowel for strength, but you may also choose to leave it open to run electronics down to the bottom to make the gem light up. It collapses into four parts, so it can fit in a small suitcase; the longest part of the four is 24\".\u003c\/p\u003e\n\u003cp\u003eNEW April 6th 2026: While this file will continue to get updates periodically, older versions are no longer being supported; the files are too old and I've made too many changes to them to make further alterations without breaking things :) While I've still kept them in the files for enterprising folks, I am only offering modifications or assistance with the current version. I've also added a 1:3 scale version for dollfies.\u003c\/p\u003e\n\u003cp\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003c\/p\u003e\n\u003cp\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003c\/p\u003e\n\u003cp\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003c\/p\u003e\n\u003cp\u003eDANGEROUSLADIES.CA\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063164924221,"sku":"44063164924221","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/graha-tias-scion-staff-3d-print-files-451975.jpg?v=1751895296"},{"product_id":"card-captor-sakuras-sword-3d-print-files","title":"Card Captor Sakura's Sword  [3D Print Files]","description":"Dangerous Ladies' 3D models for The Sword\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on any printer 220mm or taller. I've included both whole and split parts for easier printing. All gems print separately so you can mould them and cast them in clear resin if you like. All color areas print separately so you should be able to assemble after painting, too!\u003cbr\u003e\u003cbr\u003eSword finishes at 46\"; you can make it shorter by skipping a blade piece, or adjusting the vertical height of one of the blade pieces to however many inches you want. \u003cbr\u003e\u003cbr\u003eIt is quite long and delicate so we suggest printing with thicker walls.\u003cbr\u003e\u003cbr\u003eSword assembles on a 1\/4\" rod –– preferably aluminum or steel, but a dowel is fine too. This should be 44.25\" long.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063164956989,"sku":"44063164956989","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/card-captor-sakuras-sword-3d-print-files-937502.jpg?v=1751895295"},{"product_id":"graha-tias-scion-accessories-3d-print-files","title":"G'raha Tia's Scion Accessories  [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for G'raha Tia's Scion accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on just about any printer. Gems print separately. Totals about 52 pieces!\u003cbr\u003e\u003cbr\u003ePlease print size tests for scaling before printing your good ones.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063164989757,"sku":"44063164989757","price":19.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/graha-tias-scion-accessories-3d-print-files-566994.jpg?v=1751895293"},{"product_id":"ffxiv-crownsblade-gunbreaker-gunblade-3d-print-files","title":"Gunbreaker's Arm Crownsblade [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Gunbreaker weapon, \"Crownsblade\"\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Finishes at 50\". Pre-sliced for printing on a 20cmx20cmx25cm bed, with internal dowel slots for strength and keys for alignment. The only seams are on the blade. This is an intermediate build; make sure you dry-assemble everything before finishing\/painting to make sure you know how it goes together.\u003cbr\u003e\u003cbr\u003eThe drum can be set up to spin. It mounts on the center dowel; if you do not wish for it to spin, you can just glue the drum in place.\u003cbr\u003e\u003cbr\u003eI've included a photo with all of the pieces in colour groups.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eyou should assemble these groups first (ie, all RED together, all GREEN together, etc) and then you can assemble in full. I would work in this order:\u003cbr\u003e\u003cbr\u003e- assemble\/glue all RED (with handle dowel)\u003cbr\u003e- assemble\/glue all GREEN (with body dowel)\u003cbr\u003e- assemble\/glue all PINK \u003cbr\u003e- assemble\/glue all CYAN (with blade dowels)\u003cbr\u003e- leave all BLUE pieces unassembled\u003cbr\u003e- leave all YELLOW pieces off to the side\u003cbr\u003e- start with RED with handle dowel\u003cbr\u003e- attach PINK to GREEN; it should slot onto the body dowel\u003cbr\u003e- attach GREEN\/PINK to RED using keys\u003cbr\u003e- take your BLUE pieces and align them in the space between RED and the GREEN BRACKET; the drum mount slots into the BRACKET first, then align DRUM CAPS on either side, and then slot the drum between them. It should fit snug. No glue is necessary in this step.\u003cbr\u003e- thread the drum dowel through all the pieces, and then secure with glue at the tip.\u003cbr\u003e- slot CYAN into rest of gun using blade dowel; PINK should grip the bottom to keep it from rotating.\u003cbr\u003e- add YELLOW pieces\u003cbr\u003e\u003cbr\u003eThere are five pieces of hardware required to assemble:\u003cbr\u003eHANDLE: 9\" of 1\/2\" (or 12mm) square dowel\u003cbr\u003eDRUM: 7.25\" of 1\/4\" (or 6mm) round dowel\u003cbr\u003eBODY: 6.25\" of 1\/2\" (or 12mm) square dowel\u003cbr\u003eBLADE 1: 26.75\" of 1\/2\" (or 10mm) round dowel\u003cbr\u003eBLADE 2: 19\" of 3\/8\" (or 10mm) round dowel\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063165022525,"sku":"44063165022525","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/ffxiv-crownsblade-gunbreaker-gunblade-3d-print-files-242071.jpg?v=1751895291"},{"product_id":"sailor-moons-eternal-brooch-3d-print-files","title":"Sailor Moon's Eternal Brooch [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Sailor Moon's Eternal brooch v2\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Main heart is approximately 3\" across. There's an alternate version with the wings printed separately too in case you want to do those in fabric\/foam.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003cbr\u003ehttps:\/\/bsky.app\/profile\/dangerousladies.ca\u003cbr\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063166169405,"sku":"44063166169405","price":5.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/sailor-moons-eternal-brooch-3d-print-files-427193.jpg?v=1751895289"},{"product_id":"sailor-moons-moon-stick-3d-print-files","title":"Sailor Moon's Moon Stick [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Sailor Moon's Moon Stick\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Wand is approximately 10.25\" long. All pieces assemble on keys for easy alignment. Many small pieces print separately for easy painting.\u003cbr\u003e\u003cbr\u003eThe centre handle detail has a \"dome\" piece; if you can't print this in clear filament (or clear resin) you may want to omit it and simply fill the centre of the handle detail with clear resin to seal in the smaller details.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ehttp:\/\/dangerousladies.storenvy.com\u003cbr\u003ehttps:\/\/bsky.app\/profile\/dangerousladies.ca\u003cbr\u003ehttp:\/\/instagram.com\/thedangerousladies\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063166202173,"sku":"44063166202173","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/sailor-moons-moon-stick-3d-print-files-666706.jpg?v=1751895288"},{"product_id":"sailor-moons-eternal-moon-article-brooch-3d-print-files","title":"Sailor Moon's Eternal Moon Article Brooch [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Sailor Moon's Eternal Article brooch\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Main heart is approximately 3\" across. All gems print separately. There's an alternate version with the wings printed separately too.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063166234941,"sku":"44063166234941","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/sailor-moons-eternal-moon-article-brooch-3d-print-files-534261.jpg?v=1751895286"},{"product_id":"yshtolas-nightseeker-staff","title":"Y'shtola's Nightseeker Staff [3D Printed Kit]","description":"\u003cp\u003eA 3D printed kit for Y'shtola's Nightseeker Staff. Includes resin cast gems. Finishes at \u003cspan data-mce-fragment=\"1\"\u003e64\" long.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eAssembles on two dowels:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e47.25\" of 1\/2\" square dowel\u003c\/li\u003e\n\u003cli\u003e13.25\" of 1\/4\" square dowel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eKit does not include dowels, as they tend to be more expensive to ship than they are to buy locally! Kit version ships unassembled and unfinished.\u003cbr\u003e\u003cbr\u003eGlue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Full Kit","offer_id":50171962032445,"sku":"44063166267709","price":185.0,"currency_code":"CAD","in_stock":true},{"title":"Finished Staff","offer_id":50769057743165,"sku":null,"price":1165.0,"currency_code":"CAD","in_stock":true},{"title":"Gems Only!","offer_id":50171962065213,"sku":"44063166267710","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/files\/yshtolas-nightseeker-staff-3d-printed-kit-cosplay-8652099.png?v=1775140324"},{"product_id":"kazuhas-fabric","title":"Kazuha's Fabric","description":"Printed fabric for Genshin Impact's Kazuha. It is printed on a heavy satin on a 54\" x 39\" panel.\u003cbr\u003e\u003cbr\u003eThe fabric includes:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003esleeve details\u003c\/li\u003e\n\u003cli\u003ecollar trim\u003c\/li\u003e\n\u003cli\u003eextra leaves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePrinted in Montreal by Art of Where.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAs all products are custom-printed and made to order, please allow \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e2\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e3\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e weeks for production!\u003c\/span\u003e\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063166923069,"sku":"44063166923069","price":60.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/kazuhas-fabric-668686.jpg?v=1751895284"},{"product_id":"lokis-ragnarok-helmet-3d-print-files","title":"Loki's Ragnarok Helmet [3D Print Files]","description":"Dangerous Ladies' 3D models for Loki's Ragnarok helmet.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Includes both cut and uncut versions. The cut versions should fit on a 200x200x200 bed, but larger is obviously more convenient (with more supports.)\u003cbr\u003e\u003cbr\u003ePlease do a size test on the main crown first to test fit to your head. It is about 6.75\" wide by default. \u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003ehttp:\/\/dangerousladies.storenvy.com\u003cbr\u003ehttp:\/\/twitter.com\/dangerousladies\u003cbr\u003ehttp:\/\/instagram.com\/thedangerousladies","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063169675581,"sku":"44063169675581","price":41.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/lokis-ragnarok-helmet-3d-print-files-119010.png?v=1751895282"},{"product_id":"pomefiore-dorm-accessories-kit","title":"Pomefiore Dorm Accessories Kit","description":"A kit for Vil, Epel and Rook's dorm accessories from Twisted Wonderland. The tassel ends are 3D Printed in resin to preserve detail, and the buttons are cast in smooth, grey resin.\u003cbr\u003e\u003cbr\u003eIncludes:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e2x tassel ends\u003c\/li\u003e\n\u003cli\u003e9x button cap\u003c\/li\u003e\n\u003c\/ul\u003e\nGlue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order! Finished kits may take 2-3 weeks depending on how busy we are.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Plain Resin Kit","offer_id":44063169708349,"sku":"4.40632E+13","price":41.0,"currency_code":"CAD","in_stock":true},{"title":"Finished Set","offer_id":44063169773885,"sku":"4.40632E+13","price":137.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/files\/pomefiore-dorm-accessories-kit-496221.jpg?v=1751895281"},{"product_id":"good-king-moggle-mogs-staff-and-crown-3d-print-files","title":"Good King Moggle Mog's Staff and Crown  [3D Print Files]","description":"Dangerous Ladies' 3D models for Mog's staff and crown.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Cut for printing on a 220mm tall printer, but will comfortably fit on larger printers. Finishes at 39\", but you can adjust the length by scaling or changing the length of the handle.\u003cbr\u003e\u003cbr\u003eThe handle is a 1\" PVC pipe, cut 15\" long. \u003cbr\u003e\u003cbr\u003eThere is a small hollow channel inside the staff, and the orb is hollow, in case you want to put in some tiny LEDs. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063169806653,"sku":"44063169806653","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/good-king-moggle-mogs-staff-and-crown-3d-print-files-353709.jpg?v=1751895280"},{"product_id":"alisaie-alphinauds-earrings-and-ponytail-kit","title":"Alisaie \u0026 Alphinaud's Earrings and Ponytail [3D Printed Kit]","description":"\u003cp\u003eA printed set for Alisaie and Alphinaud's ponytail holder and earring. \u003c\/p\u003e\n\u003cp\u003eIf you would like a silver version, \u003ca href=\"https:\/\/dangerousladies.ca\/collections\/new-products\/products\/alisaie-and-alphinauds-earrings-silver\" title=\"Alisaie and Alphinaud Earrings\" rel=\"noopener\" target=\"_blank\"\u003eplease see our listing\u003c\/a\u003e!\u003cbr\u003e\u003cbr\u003eIncludes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ex1 earring curve\u003c\/li\u003e\n\u003cli\u003ex1 earring dangle\u003c\/li\u003e\n\u003cli\u003ex1 eye screw\u003c\/li\u003e\n\u003cli\u003ex1 jump ring\u003c\/li\u003e\n\u003cli\u003ex1 ponytail holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGlue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order! Ships unassembled and unfinished.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eLooking for a sewing pattern for this costume? Our friends got you covered! \u003ca href=\"https:\/\/www.indigopatterns.com\/product-page\/endwalker-alisaie-sewing-pattern\" title=\"Indigo Patterns - Endwalker Alisaie Sewing Pattern\" rel=\"noopener\" target=\"_blank\"\u003eIndigo Patterns - Endwalker Alisaie Sewing Pattern\u003c\/a\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Full Alphinaud Kit","offer_id":44063169970493,"sku":"44063169970493","price":41.0,"currency_code":"CAD","in_stock":true},{"title":"Full Alisaie Kit","offer_id":44063170003261,"sku":"44063170003261","price":41.0,"currency_code":"CAD","in_stock":true},{"title":"Earring Only","offer_id":44063170036029,"sku":"44063170036029","price":21.0,"currency_code":"CAD","in_stock":true},{"title":"Alisaie Ponytail Only","offer_id":44063170068797,"sku":"44063170068797","price":21.0,"currency_code":"CAD","in_stock":true},{"title":"Alphinaud Ponytail Only","offer_id":44063170101565,"sku":"44063170101565","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/alisaie-alphinauds-earrings-and-ponytail-3d-printed-kit-377252.jpg?v=1751895278"},{"product_id":"liyue-and-mondstadt-vision-pendants-3d-print-files","title":"Liyue and Mondstadt Vision Pendants [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Vision Pendants for Mondstadt and Liyue.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Everything should fit on even small printers. We've included solid and hollow versions for people who might want to experiment with lights. If you want it double-sided, just print two and attach them back to back!\u003cbr\u003e\u003cbr\u003ePlease test print pieces for sizing. \u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063170789693,"sku":"44063170789693","price":11.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/liyue-and-mondstadt-vision-pendants-3d-print-files-120210.jpg?v=1751895277"},{"product_id":"bayonettas-keychain-gems-3d-print-files","title":"Bayonetta's Keychain Gems [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Bayonetta's keychain gems.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Perfect for resin printing, but works FDM too if you print really tiny. Each gem has a different raised flower detail.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls\/infill for strength.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063174197565,"sku":"44063174197565","price":4.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/bayonettas-keychain-gems-3d-print-files-566177.jpg?v=1751895275"},{"product_id":"bayonettas-love-is-blue-pistols-3d-print-files","title":"Bayonetta's Love Is Blue Pistols [3D Print Files]","description":"Dangerous Ladies' 3D models for Bayonetta's Love is Blue guns.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Sliced for printing on a 200mm printer. It also includes a \"track\" STL files that you can attach to your heel that the gun slots into; that way you can make them removable from your shoes!\u003cbr\u003e\u003cbr\u003eDoes not include files for the gun body gems; you can pick those up from craft stores pre-made, or \u003ca href=\"https:\/\/dangerousladies.ca\/products\/bayonettas-love-is-blue-pistols-kit\" title=\"Love is blue Bayonetta Prop Cosplay\"\u003epurchase the body gems and charm frames and gems here\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls\/infill for strength.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063174263101,"sku":"44063174263101","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/bayonettas-love-is-blue-pistols-3d-print-files-215791.jpg?v=1751895273"},{"product_id":"estiniens-gae-bolg-lance-3d-print-files","title":"Estinien's Gae Bolg Lance [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Estinien Wyrmblood's Gae Bolg lance.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003c\/p\u003e\n\u003cp\u003e.stl format. Finishes at 92\" or 72\". The 92\" version is pre-sliced for printing on a 200mm, 300mm or 400mm tall bed, with internal dowel slots for strength and keys for alignment. The 72\" version is also sliced with keys and internal dowels, but is only for a 250mm bed.\u003c\/p\u003e\n\u003cp\u003e-----------\u003cbr\u003e92\" VERSION:\u003cbr\u003eTail Blade: \u003cbr\u003eAssembles with a 6.75” long piece of 1\/4” dowel. You may want to use aluminum or steel instead of dowel to add a bit of extra weight to counter-balance the head and give it strength. Consider printing the tail blade with really dense infill and triple-thick walls as well; you’ll want to rest the lance on its end while standing\/posing, and making it extra durable will make it safer to lean. It will also counter-balance the weight of the head nicely. \u003c\/p\u003e\n\u003cp\u003eHead:\u003cbr\u003eAssembles with a 9” long SQUARE dowel, 1\/2”; this is square so it can help align the blade and add more strength. As with the tail, I suggest printing the tip with really thick walls anyway to protect it from being poked into things and snapping.\u003c\/p\u003e\n\u003cp\u003eHandle:\u003cbr\u003e62” of 1” dowel. If you want to put a break in it where the middle part of the handle is, where the wire starts, then you can do 22” (bottom half) and 30” (top half.)\u003c\/p\u003e\n\u003cp\u003eWire:\u003cbr\u003eThe red wire can be made with 1\/4\" aquarium tubing, or similar.\u003c\/p\u003e\n\u003cp\u003eIf you want to use a 3\/4” PVC pipe instead, print everything at 103% scale. I suggest printing ONE piece first and taking it with you to the hardware store to test the fit; different PVC is made with different wall sizes and is measured by its inner diameter. (Hence a Schedule 40 3\/4” PVC pipe having an outer diameter of just a hair over an inch.) Schedule 40, Schedule 80 and Class 200 PVC pipes should all have an outer diameter of 26.67mm but if your printer is not super fine tuned you may want to print at 104% or higher to give yourself a tiny bit of wiggle room.\u003c\/p\u003e\n\u003cp\u003e-------\u003cbr\u003e72\" VERSION\u003cbr\u003eThis slimmer, longer (but still smaller) version assembles on a 3\/4\" rod. I suggest aluminum for strength, as a wooden dowel of this diameter may bend. It is cut 49.5\" long.\u003c\/p\u003e\n\u003cp\u003eIt uses a 5mm OD aquarium tubing for the cord. You may want to run wire inside it to give it more strength.\u003c\/p\u003e\n\u003cp\u003eIt otherwise uses only printable keys so there's nothing else complicated about it.\u003c\/p\u003e\n\u003cp\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003c\/p\u003e\n\u003cp\u003eWe printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm. \u003c\/p\u003e\n\u003cp\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003c\/p\u003e\n\u003cp\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063174295869,"sku":"44063174295869","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/estiniens-gae-bolg-lance-3d-print-files-135566.jpg?v=1751895272"},{"product_id":"jeannes-all-for-one-pistols-3d-print-files","title":"Jeanne's All For One Pistols [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Jeanne's All For One guns.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Sliced for printing on a 200mm printer. It also includes a \"shoe magnet\" STL files that you can attach to your heel that the gun slots into; that way you can make them removable from your shoes! There are rail pieces for the gun body itself with magnets, and ones without. All the small pieces print great on resin printers but can be done FDM as well with fine enough layers. \u003cbr\u003e\u003cbr\u003eThere are a couple different cuts of the main gun body so you can print for your preference. I think printing it in four parts is easiest to sand print lines out of but it means more seams. \u003cbr\u003e\u003cbr\u003eI have included generic gem files but you may want to purchase standard faceted gems from a craft store. The handle slot fits a real dime.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls\/infill for strength.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063174394173,"sku":"44063174394173","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/jeannes-all-for-one-pistols-3d-print-files-916148.jpg?v=1751895270"},{"product_id":"poke-flute-pokeflute-3d-print-files","title":"Poké Flute Pokeflute [3D Print Files]","description":"Dangerous Ladies' 3D models for a Pokéflute.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Finishes just shy of 12\". Needs a printer at least 175mm tall. \u003cbr\u003e\u003cbr\u003eWhile it is hollow and does have open keys and a mouthpiece, it probably sounds awful. I'm a prop maker, not a flute maker. :)\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063174918461,"sku":"44063174918461","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/poke-flute-pokeflute-3d-print-files-298099.jpg?v=1751895269"},{"product_id":"ichigos-strawberry-bell-bell-3d-print-files","title":"Ichigo's Strawberry Bell Bell [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Ichigo's Strawberry Bell Bell.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed, with internal keys for strength and alignment. Uses a small 1\/4\" dowel to attach the nonfunctional bell. Frame for the heart is narrow and should be printed with extra-thick walls; it can be wrapped with batting and fur or fleece to create a plush outer shell.\u003cbr\u003e\u003cbr\u003eUPDATE JAN 18 2022: There is now an alternate heart file to add wings to the back! If you've bought the files previously, just message with your order number and I'll send you the updated files.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063175737661,"sku":"44063175737661","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/ichigos-strawberry-bell-bell-3d-print-files-692253.jpg?v=1751895266"},{"product_id":"linhardts-three-hopes-accessories-3d-print-files","title":"Linhardt's Three Hopes Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Linhardt's Three Hopes accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on basically any printer, but the arm band takes up to 6\" wide. Please test for size before printing your finals.\u003cbr\u003e\u003cbr\u003eThe arm bands should be printed with thick walls\/a thick top layer, and then can be heat formed to bend around your arm. Go slow!\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063175868733,"sku":"44063175868733","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/linhardts-three-hopes-accessories-3d-print-files-103986.jpg?v=1751895265"},{"product_id":"queen-ramonda-crown-headpiece-3d-print-files","title":"Queen Ramonda Crown Headpiece [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Queen Ramonda's crown.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eWe are currently NOT offering printed kits of this item.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e.stl format. Prints in one piece, and thus requires a 300x300 bed. No exceptions, unless you want to cut it into chunks yourself! It is about 22\" in circumference around the bottom (where your head goes) but can be carefully scaled up and down. Keep in mind the bars\/walls are very thin so trying to go too small will result in even more fragile results.\u003cbr\u003e \u003cbr\u003eTHIS IS A POTENTIALLY CHALLENGING PRINT, so there are three versions. All three versions have \"test chunks\" if you want to experiment with a small part of it without blasting through filament and print times.\u003c\/p\u003e\n\u003cp\u003eThe \"Easier edition\" doesn't have open gaps and thus requires far less support, but is obviously a little different from the screen-used one. You will not be able to cut the inner parts out without breaking it.\u003c\/p\u003e\n\u003cp\u003eThe \"Easiest\" edition is similar to the Easier addition, but has even more filled in spots. Because it does not have voids inside of it, it may end up slightly heavier, but will need far fewer supports.\u003c\/p\u003e\n\u003cp\u003eThe \"SAW Edition\" is far more screen accurate but it is essentially a torture test for most 3D printers; it requires a lot of support and will be very fragile. The original used in the movie is 3D printed itself; it's an SLS print done in Polyamide 12, which you can do through companies like Shapeways. This is obviously quite expensive and inaccessible to most people, but I've included the screen accurate one for anyone who wishes to experiment with it further. Happy printing!\u003c\/p\u003e\n\u003cp\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003c\/p\u003e\n\u003cp\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003c\/p\u003e\n\u003cp\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063176884541,"sku":"44063176884541","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/queen-ramonda-crown-headpiece-3d-print-files-774907.jpg?v=1751895264"},{"product_id":"mad-sword-3d-printed-kit","title":"Lio's Mad Sword [3D Printed Kit]","description":"A 3D printed kit for Mad's sword. Printed with clear filament with a hollow interior so you can put lights in it. Many of our clients finish these with holographic\/reflective vinyl for that colour-shift look. Finishes at about 37\" long, and has slots for 1\/8\" dowel pegs for assembly.\u003cbr\u003e\u003cbr\u003eGlue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order!\u003cbr\u003e\u003cbr\u003eFinished sword in photo is by @Poisonne (Instagram)\/@Poisonneus (Twitter) \u003cbr\u003ePhotos by Paul Hillier and LXE.Photo\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063176950077,"sku":"44063176950077","price":171.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/mads-sword-3d-printed-kit-287776.jpg?v=1775152773"},{"product_id":"luxs-radiant-staff-3d-print-files","title":"Lux's Radiant Staff [3D Print Files]","description":"Dangerous Ladies' 3D models for Lux's Radiant Staff\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Sliced for a 300mm printer but includes some files for taller printers, as well as many smaller parts. Finishes around 60\". \u003cbr\u003e\u003cbr\u003eThe gem is made to float by mounting it on an acrylic rod. If you can't find clear acrylic rods, you can always use a regular dowel and paint it.\u003cbr\u003e\u003cbr\u003eBoth halves come apart on a screw system; there is a slot inside the middle joint for a 1\/2” nut (measured from flat side to flat side) that is 1\/4” deep. Glue a nut in there and put a corresponding double-ended bolt to screw them together.\u003cbr\u003e\u003cbr\u003eAssembles on the following:\u003cbr\u003e15\" of 1\/2\" dowel for handle, x2\u003cbr\u003e7.25\" of 1\/4\" clear acrylic for gem mount, x2\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls\/infill for strength.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063176982845,"sku":"44063176982845","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/luxs-radiant-staff-3d-print-files-771253.jpg?v=1751895262"},{"product_id":"olivias-dancer-rings-3d-print-files","title":"Olivia's Dancer Rings [3D Print Files]","description":"Dangerous Ladies' 3D models for Olivia's Dancer rings.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed. \u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1-0.15mm layers.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063177048381,"sku":"44063177048381","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/olivias-dancer-rings-3d-print-files-936752.jpg?v=1751895261"},{"product_id":"gwens-scissors-3d-print-files","title":"Gwen's Scissors [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Gwen's Scissors.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Finishes at 72\". Sliced for 375mm, 250mm and 200mm tall printers. Actually moves (if you put a bolt in it.) I've included a whole version if you'd like to cut it for your own printer.\u003cbr\u003e\u003cbr\u003eThe joint is made for a 1\/4-20 x 30mm furniture bolt and matching 1\/4-20 hex nut; the nut gets permanently glued in the underside and a cap put overtop to hide it, and then the bolt screws into it from the other side, then has a decorative cap that pops in overtop. You'll have to play with paint tolerances but it should be relatively seamless. This way you should be able to use an Allen key to tighten\/loosen it into the nut on the other side. You'll also want to put a fishing wire loop on the underside of the cap so you can pull it out of its slot easily!\u003cbr\u003e\u003cbr\u003eI've also included a cut file that is JUST the bolt structure so you can print that part first and take it to the hardware store and test different bolts with it -- I've made it for a 1\/4-20 - 30mm bolt but sometimes these things need tweaking to preference.\u003cbr\u003e\u003cbr\u003eAssembles on the following rods. We suggest using aluminum rods for strength but you can use wood too.\u003cbr\u003e\u003cbr\u003e400MM VERSION:\u003cbr\u003e31.5\" of 1\/8\" (Blades)\u003cbr\u003e3.5\" of 1\/4\" (Base 2)\u003cbr\u003e0.5\" of 1\/4\" (Base 2)\u003cbr\u003e3\" of 1\/8\" x2 (Base 1)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 2)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 1)\u003cbr\u003e1.25\" of 1\/4 (Handle 1)\u003cbr\u003e\u003cbr\u003e250MM VERSION:\u003cbr\u003e32.25\" of 1\/8\" x4 (Blades)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 2 - between Upper 1 and Upper 2)\u003cbr\u003e3\" of 1\/4\" (Handle 2 - between Upper 2 and Upper 3)\u003cbr\u003e3.5\" of 1\/4\" (Handle 2 - between Upper 3 and Upper 4)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 1 - between Upper 2\/3 and Upper 4)\u003cbr\u003e3.25\" of 1\/4\" (Handle 1 - between Upper 3 and Upper 1)\u003cbr\u003e4.25\" of 1\/4\" (Handle 1 - between Upper 2 and Upper 1)\u003cbr\u003e1.25\" of 1\/4 (Handle 1 - between Upper 2\/3 and Upper 4)\u003cbr\u003e\u003cbr\u003e200MM VERSION:\u003cbr\u003e32.25\" of 1\/8\" x4 (Blades)\u003cbr\u003e3.5\" of 1\/4\" (Base 2)\u003cbr\u003e0.5\" of 1\/4\" (Base 2)\u003cbr\u003e3\" of 1\/8\" x2 (Base 1)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 2 - between Upper 1 and Upper 2)\u003cbr\u003e3\" of 1\/4\" (Handle 2 - between Upper 2 and Upper 3)\u003cbr\u003e3.5\" of 1\/4\" (Handle 2 - between Upper 3 and Upper 4)\u003cbr\u003e3\" of 1\/4\" x2 (Handle 1 - between Upper 2\/3 and Upper 4)\u003cbr\u003e3.25\" of 1\/4\" (Handle 1 - between Upper 3 and Upper 1)\u003cbr\u003e4.25\" of 1\/4\" (Handle 1 - between Upper 2 and Upper 1)\u003cbr\u003e1.25\" of 1\/4 (Handle 1 - between Upper 2\/3 and Upper 4)\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063177212221,"sku":"44063177212221","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/gwens-scissors-3d-print-files-465791.jpg?v=1751895259"},{"product_id":"byleths-applique-and-designs-digital-pattern","title":"Byleth's Applique and Designs [Digital Pattern]","description":"Digital patterns for the different designs and decals on Byleth's costume. These can be used as stencils, appliqué or templates for embroidery.\u003cbr\u003e\u003cbr\u003eWe will be updating this file when the game comes out to reflect new information. If you've bought it previously, you're entitled to updated versions on request.\u003cbr\u003e\u003cbr\u003ePattern includes: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eChest Symbol (variant 1)\u003c\/li\u003e\n\u003cli\u003eChest Symbol (variant 2)\u003c\/li\u003e\n\u003cli\u003eBack Symbol\u003c\/li\u003e\n\u003cli\u003eChest Brooch\u003c\/li\u003e\n\u003cli\u003eFlame Crest\u003c\/li\u003e\n\u003cli\u003eMysterious Crest\u003c\/li\u003e\n\u003cli\u003eSleeve Design\u003c\/li\u003e\n\u003c\/ul\u003e\nAll digital patterns are emailed to address on order within 24 hours of purchase.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180128573,"sku":"44063180128573","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/byleths-applique-and-designs-digital-pattern-594572.jpg?v=1735883957"},{"product_id":"mercedess-three-hopes-accessories-3d-print-files","title":"Mercedes's Three Hopes Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Mercedes's Three Hopes outfit.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on basically any printer.\u003cbr\u003e\u003cbr\u003eThere are two versions of the sash tube –– one is easier to stuff fabric through than the other!\u003cbr\u003e\u003cbr\u003ePlease test print sizing before printing your finished ones!\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180226877,"sku":"44063180226877","price":10.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/mercedess-three-hopes-accessories-3d-print-files-440754.jpg?v=1751895253"},{"product_id":"scaramouches-hat-fabric","title":"Scaramouche's Hat Fabric","description":"\u003cp\u003ePrinted fabric for Scaramouche's hat fabric. It is printed on a poly chiffon panel measuring 54\" x 39\". \u003cbr\u003e\u003cbr\u003eThe printed veil size is 52\" x 14\" of each veil. You will need to cut and seal the edges. We recommend baby hemming the edges to seal it.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete your Scaramouche cosplay:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/dangerousladies.ca\/products\/scaramouches-accessories-resin-kit\" title=\"Scaramouche's Accessories Kit for Cosplay\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eScaramouche's Accessories Kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/dangerousladies.ca\/products\/scaramouches-hat-kit-3d-printed-kit\" title=\"Scaramouche's Hat Kit for Cosplay\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eScaramouche's Hat Kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrinted in Montreal by Art of Where.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf fabric is in stock, we ship within 1-2 business days. Otherwise, expect a 2-3 week printing and processing time. If you have a deadline, please let us know in the order notes!\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180259645,"sku":"44063180259645","price":47.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/scaramouches-hat-fabric-856393.jpg?v=1742267006"},{"product_id":"mollymauks-scimitars-3d-print-files","title":"Mollymauk's Scimitars [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Mollymauk's scimitars.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed. Uses one 18.5\" dowels (1\/2\" diameter) per sword for assembly. Swords finish at approximately 30\" each.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e- Alternate hollow blade files for light-up versions\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 mm layers.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for a sewing pattern for this costume? Our friends got you covered! \u003ca href=\"https:\/\/www.indigopatterns.com\/product-page\/mollymauk-sewing-pattern\" title=\"Indigo Patterns - Mollymauk Sewing Pattern\" rel=\"noopener\" target=\"_blank\"\u003eIndigo Patterns - Mollymauk Sewing Pattern\u003c\/a\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180325181,"sku":"44063180325181","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/mollymauks-scimitars-3d-print-files-194118.jpg?v=1751895251"},{"product_id":"lynas-accessories-3d-print-files","title":"Lyna's Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Lyna's Accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on any printer. I've included a \"stamp\" file for the belt detail; print this with super thick walls and attach it to a dowel to use as a handle and you should be able to stamp leather or EVA foam with it.\u003cbr\u003e\u003cbr\u003ePlease print test versions to ensure you like the scale\/sizing.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180882237,"sku":"44063180882237","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/lynas-accessories-3d-print-files-967874.jpg?v=1751895250"},{"product_id":"chibi-moons-prism-heart-compact-3d-print-files","title":"Chibi Moon's Prism Heart Compact [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for the Prism Heart Compact for Chibi Moon.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on any printer. Prints in separate parts for easy painting\/finishing. Please do test prints of the base pieces for size before printing your final\/good ones!\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003cbr\u003ehttps:\/\/bsky.app\/profile\/dangerousladies.ca\u003cbr\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180915005,"sku":"44063180915005","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/chibi-moons-prism-heart-compact-3d-print-files-607534.jpg?v=1751895249"},{"product_id":"celines-accessories-3d-print-files","title":"Celine's Accessories [3D Print Files]","description":"Dangerous Ladies' 3D models for Celine’s Accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Crown needs a 180x150x135 mm printer, but the rest should fit on any printer.\u003cbr\u003e\u003cbr\u003eBrooch is roughly 2.25” from top to bottom and has a separate gem. Buttons are 1” across.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003eMaterials: digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063180947773,"sku":"44063180947773","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/celines-accessories-3d-print-files-105076.jpg?v=1751895248"},{"product_id":"vils-crown-3d-print-files","title":"Vil's Crown [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for accessories for Vil's crown.\u003cbr\u003eModels by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. This is a challenging print! It fits on a 200x200mm print bed. \u003cbr\u003e\u003cbr\u003eBecause this is so challenging, I have included a version that is \"filled in\" with 0.4mm walls, and a version that is filled in AND has a platform to be printed on. It still needs support -- it's very thin -- but if you are careful you can cut out the 0.4mm walls to open it up afterwards. This may survive the printing process much better than the opened version, but is obviously more laborious to finish.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063181013309,"sku":"44063181013309","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/vils-crown-3d-print-files-595853.jpg?v=1751895246"},{"product_id":"scathachs-lances-3d-print-files","title":"Scathach's Lances [3D Print Files]","description":"Dangerous Ladies' 3D models for Scathach's lances\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. \u003cbr\u003e\u003cbr\u003ePre-sliced for printing on a 20cmx20cmx20cm bed.\u003cbr\u003e\u003cbr\u003eModel is set up to use a 3\/4\" PVC pipe. The blades use 1\/4\" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable. \u003cbr\u003e\u003cbr\u003eThe decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Reference images\u003cbr\u003e- LONG lance .stl files\u003cbr\u003e- SHORT lance .stl files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063181046077,"sku":"44063181046077","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/scathachs-lances-3d-print-files-334279.jpg?v=1751895245"},{"product_id":"annettes-timeskip-accessories-3d-print-files","title":"Annette's Timeskip Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Annette's Timeskip Accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Please do a scale print test to check that the size works for you!\u003cbr\u003e\u003cbr\u003eIncludes all of her small accessories plus files for generic domes and diamonds for her little accessories.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for a sewing pattern for this costume? Our friends got you covered! \u003ca href=\"https:\/\/www.indigopatterns.com\/product-page\/time-skip-annette-sewing-pattern\" title=\"Indigo Patterns - Time Skip Annette Sewing Pattern\" rel=\"noopener\" target=\"_blank\"\u003eIndigo Patterns - Time Skip Annette Sewing Pattern\u003c\/a\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063182356797,"sku":"44063182356797","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/annettes-timeskip-accessories-3d-print-files-532423.jpg?v=1751895244"},{"product_id":"yun-jins-twirling-idle-staff-3d-print-files","title":"Yun Jin's Twirling Idle Staff [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Yun Jin's Twirling Idle Staff\u003cbr\u003eModels by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Fits just about any printer, either FDM or resin. Designed to finish at around 70\", but you can make it any size you want by changing the length of the dowel. \u003cbr\u003e\u003cbr\u003eAssembles on a 64\" dowel, 1\" diameter. You can use a 3\/4 PVC pipe (outer diameter 26mm) instead if you print everything at 102%. You could also switch to a 3\/4\" wooden dowel by printing at 75% scale. It's very friendly for resizing!\u003cbr\u003e\u003cbr\u003eThere are also two versions of this spear: one with the red tassel built in, and one where it's absent so you can tie your own on it. Install the neck piece 1\" from the end of the handle, and tie your yarn\/fabric\/fur\/etc to the bottom third of that 1\" gap. Fold the yarn back down over the handle and then cap it off with the cup and spear pieces.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLooking for a sewing pattern for this costume? Our friends got you covered! \u003ca rel=\"noopener\" title=\"Indigo Patterns - Yun Jin Sewing Pattern\" href=\"https:\/\/www.indigopatterns.com\/product-page\/yun-jin-sewing-pattern-1\" target=\"_blank\"\u003eIndigo Patterns - Yun Jin Sewing Pattern\u003c\/a\u003e\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063182586173,"sku":"44063182586173","price":11.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/yun-jins-twirling-idle-staff-3d-print-files-230605.jpg?v=1751895243"},{"product_id":"cardcaptor-sakuras-sword-3d-printed-kit","title":"Card Captor Sakura's Sword [3D Printed Kit]","description":"\u003cp\u003eA 3D printed cosplay kit for Sakura's sword from Card Captor Sakura. Sword finishes at 46\"; you can make it shorter by skipping a blade piece, or adjusting the vertical height of one of the blade pieces to however many inches you want. Sword assembles on a 1\/4\" rod –– preferably aluminum or steel, but a dowel is fine too. This should be 44.25\" long.\u003cbr\u003e\u003cbr\u003eKits does not include dowels, as they tend to be more expensive to ship than they are to buy locally!\u003cbr\u003e\u003cbr\u003eGlue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order! Finished kits may take 2-3 weeks depending on how busy we are.\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063182553405,"sku":"44063182553405","price":171.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/card-captor-sakuras-sword-3d-printed-kit-193237.jpg?v=1751895242"},{"product_id":"beidous-accessories-3d-print-files","title":"Beidou's Accessories [3D Print Files]","description":"Dangerous Ladies' 3D models for Beidou's accessories\u003cbr\u003eModels by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. The hair stick needs a bed of 300mm in one direction, but there is a split down version that can print on 200mm.\u003cbr\u003e\u003cbr\u003ePlease test everything for size before you print at high quality settings.\u003cbr\u003e\u003cbr\u003eThe hair piece has two versions. One is in three parts: a base ring, a decorative floral piece and the stick. Because the stick is in two parts, you can make it removable by popping out from both sides, but you might want to just glue it all together permanently in your wig. Up to you! The other is in two parts, and in some ways is a trickier print, but it ensures the right angle for the stick to pass under and then over. The v2 is the game-accurate version!\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"All Accessories","offer_id":47767237853501,"sku":"47767237853501","price":21.0,"currency_code":"CAD","in_stock":true},{"title":"Hairpin Only","offer_id":47767237886269,"sku":"47767237886269","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/beidous-accessories-3d-print-files-122862.jpg?v=1751895240"},{"product_id":"morrigans-necklace-3d-print-files","title":"Morrigan's Necklace [3D Print Files]","description":"Dangerous Ladies' 3D models for Morrigan's necklace pieces.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on just about any printer and easily resized! \u003cbr\u003e\u003cbr\u003eI've included a plain and a textured version. However, the textured version doesn't fit on Etsy's low upload sizes, so you can request access to this google drive box after purchase to get access. The link is in the notes file in the zip.\u003cbr\u003e\u003cbr\u003eI've included some basic beads for the bottom beads, but I do suggest just buying beads for those as it's easier than bodyshopping and painting basic beads.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063183077693,"sku":"44063183077693","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/morrigans-necklace-3d-print-files-819820.jpg?v=1751895238"},{"product_id":"deedlits-sword-and-sheath-3d-print-files","title":"Deedlit's Sword and Sheath [3D Print Files]","description":"Dangerous Ladies' 3D models for Deedlit's Sword and Sheath. \u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed.\u003cbr\u003e\u003cbr\u003eThis sword is very long and slender; it finishes at approximately 36\" and is very delicate. We suggest you use a 1\/4\" steel rod as the internal core (32\" long) as it will give the print a great deal more integrity.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.1 layers with 1.2mm walls. 2mm walls would be great too.\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063183962429,"sku":"44063183962429","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/deedlits-sword-and-sheath-3d-print-files-371408.jpg?v=1751895237"},{"product_id":"lumines-accessories-3d-print-files","title":"Lumine's Armour and Accessories [3D Print Files]","description":"\u003cp\u003eDangerous Ladies' 3D models for Lumine's armour accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003c\/p\u003e\n\u003cp\u003e.stl format. Needs a bed with a minimum 200x200 footprint for some of the bigger split-up pieces, but I've included some whole pieces for those with bigger printers.\u003c\/p\u003e\n\u003cp\u003eAll gems print separately.\u003c\/p\u003e\n\u003cp\u003ePlease test print pieces for scale\/size before printing your final pieces!\u003c\/p\u003e\n\u003cp\u003eFor the whole version of the belt, I suggest printing in TPU so it's flexible.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003c\/p\u003e\n\u003cp\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003c\/p\u003e\n\u003cp\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003c\/p\u003e\n\u003cp\u003ehttp:\/\/dangerousladies.storenvy.com\u003cbr\u003ehttp:\/\/twitter.com\/dangerousladies\u003cbr\u003ehttp:\/\/instagram.com\/thedangerousladies\u003c\/p\u003e","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063184027965,"sku":"44063184027965","price":30.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/files\/lumines-armour-and-accessories-3d-print-files-cosplay-2532115.png?v=1763694648"},{"product_id":"soras-kh4-accessories-3d-print-files","title":"Sora's KH4 Accessories [3D Print Files]","description":"Dangerous Ladies' 3D models for Sora's KH4 Accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on any printer. It has an optional back ring piece for the necklace.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063184060733,"sku":"44063184060733","price":4.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/soras-kh4-accessories-3d-print-files-645703.jpg?v=1751895235"},{"product_id":"spirit-blossom-kindreds-bow-3d-print-files","title":"Kindred's Spirit Blossom Bow [3D Print Files]","description":"Dangerous Ladies' 3D models for Spirit Blossom Kindred's Bow\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Cut for a 200x200x300 printer or a 200x200x200 but many pieces will fit larger or smaller, and I've included whole versions of the arms for those who want to do custom cuts. Finishes at a delicious 59\" long. There are a couple versions that will let you make it collapsible in various ways, or you can just glue it together permanently.\u003cbr\u003e\u003cbr\u003eALL ARM PIECES GET PRINTED TWICE –– remember to MIRROR the second print! Otherwise it won't be symmetrical.\u003cbr\u003e\u003cbr\u003eThe arms assemble using 18 (for 300mm) or 30 (for 200mm)  1.5” chunks of 3\/8” dowel. (You may want to cut these a few mm shorter if your printer doesn’t print very tight overhangs!) I have included a file for a peg if you'd rather print them yourself but I do consider dowels stronger because prints can shear along the middle. \u003cbr\u003e\u003cbr\u003eASSEMBLY A: DOWEL HANDLE\u003cbr\u003eIf doing the dowel handle, you just need a 13.25” long square dowel (1\/2” diameter) to attach everything together. The slot is tight enough that you can theoretically slot it apart for travel and whatnot, but it won’t be as secure as the other options. This is, however, the easy option.\u003cbr\u003e\u003cbr\u003eASSEMBLY B: PVC PIPE HANDLE\u003cbr\u003eIf doing the PVC pipe handle, there’s a 1” slot in the handle cap. You can install a 3\/4” PVC pipe here OR the male-female coupling\/adapter fittings for a screw-on 1\/2” PVC pipe. These are not all made equally so I strongly suggest printing the bow arm joint part and bringing it to the hardware store to make sure you find something that works. This is the option that lets your handle screw off without needing to drill holes or anything, just glue the joints in and go.\u003cbr\u003e\u003cbr\u003eASSEMBLY C: SCREW JOINT HANDLE\u003cbr\u003eIf doing the screw joint handle, there is a slot inside the bow arm joint for a 1\/2” nut (measured from flat side to flat side) that is 1\/4” deep. Glue a nut in there and put a corresponding hangar bolt into a 11.5” long dowel (1” diameter) for the handle. This is the trickiest option (C) as you need to install the hangar bolt into the centre of the dowel on both ends, but it is the cleanest look and most secure assembly! \u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003eWe printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 10%) and walls of about 1.2-1.4mm, ideally 2mm on the joint piece. \u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063184224573,"sku":"44063184224573","price":25.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/spirit-blossom-kindreds-bow-3d-print-files-197332.jpg?v=1751895233"},{"product_id":"jeannes-watch-3d-print-files","title":"Jeanne's Watch [3D Print Files]","description":"Dangerous Ladies' 3D models for Jeanne's watch\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Static prop, does not open. Perfect for resin printing but works on FDM just fine at slower speeds and step layers.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063186157885,"sku":"44063186157885","price":4.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/jeannes-watch-3d-print-files-401106.jpg?v=1751895232"},{"product_id":"xiaos-dagger-pendant-3d-print-files","title":"Xiao's Dagger Pendant [3D Print Files]","description":"Dangerous Ladies' 3D models for Xiao's chest dagger.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format.\u003cbr\u003e\u003cbr\u003eWe suggest test printing for scale before doing final prints.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063186223421,"sku":"44063186223421","price":3.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/xiaos-dagger-pendant-3d-print-files-568861.jpg?v=1751895231"},{"product_id":"endwalker-warrior-of-light-small-accessories-3d-print-files","title":"Endwalker Warrior of Light Small Accessories [3D Print Files]","description":"Dangerous Ladies' 3D models for the Endwalker Warrior of Light Accessories.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit on any printer. Great for resin printing.\u003cbr\u003e\u003cbr\u003ePlease print test versions to ensure you like the scale\/sizing.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063186190653,"sku":"44063186190653","price":11.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/endwalker-warrior-of-light-small-accessories-3d-print-files-288713.jpg?v=1751895230"},{"product_id":"xiaos-incense-pot-3d-print-files","title":"Xiao's Incense Pot [3D Print Files]","description":"Dangerous Ladies' 3D models for Xiao's incense pot.\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Should fit just about any printer!\u003cbr\u003e\u003cbr\u003eWe suggest test printing for scale before doing final prints.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063186256189,"sku":"44063186256189","price":7.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/xiaos-incense-pot-3d-print-files-685318.jpg?v=1751895228"},{"product_id":"xiaos-mask-3d-print-files","title":"Xiao's Mask [3D Print Files]","description":"Dangerous Ladies' 3D models for Xiao's mask\u003cbr\u003eModel by Jennifer Rezny (@quicksparrows)\u003cbr\u003e\u003cbr\u003e.stl format. Includes both the detailed and simple versions of his masks, and \"whole\" and \"halved\" versions for printing. The mask is hollow with open teeth and nostrils so you can wear it, but you will need to test print part of the mask for sizing if you want to make it fit you.\u003cbr\u003e\u003cbr\u003eBy default the mask is approximately 12\" tall.\u003cbr\u003e\u003cbr\u003eTusks print separately.\u003cbr\u003e\u003cbr\u003eFiles include:\u003cbr\u003e- Photos\u003cbr\u003e- .STL files\u003cbr\u003e\u003cbr\u003ePlease do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.\u003cbr\u003e\u003cbr\u003eFeel free to tag us to show us what you print and make! We love to see finished works.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/dangerousladies.storenvy.com\"\u003ehttp:\/\/dangerousladies.storenvy.com\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/twitter.com\/dangerousladies\"\u003ehttp:\/\/twitter.com\/dangerousladies\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/instagram.com\/thedangerousladies\u0026lt;br\/\u0026gt;\u0026lt;br\/\u0026gt;Materials:\"\u003ehttp:\/\/instagram.com\/thedangerousladies\u003cbr\u003e\u003cbr\u003eMaterials:\u003c\/a\u003e digital file","brand":"DangerousLadies","offers":[{"title":"Default Title","offer_id":44063187009853,"sku":"44063187009853","price":21.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/products\/xiaos-mask-3d-print-files-729574.jpg?v=1751895227"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/8078\/9053\/collections\/dangerous-ladies-cosplay-kits-1986208.jpg?v=1766221271","url":"https:\/\/dangerousladies.ca\/collections\/all.oembed?page=159","provider":"DangerousLadies","version":"1.0","type":"link"}